What's new
By:
Ram Heavy Duty Forum

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Post Pics of your 2019+ 2500 or 3500!

Ewoodard said:
Is that the frontier bumper you have? If so how do you like it? Thinking about getting one.
Click to expand...
My bumpers both front and rear are from Steelcraft "Elevation" series they are the only manufacturer the E coats and Powder coats their products.
The front one weighs about 300 lbs the rear about 85.
Also have there headache rack that I swap out when I run my topper.
Great fitting bumper well built the factory tow hooks mount to the bumper..I added led bulbs in all of the sensor holes my truck doesn't have that option..
I shopped around got a great price and free shipping..I think 960 for the front and I think 500 for the rear..
 
TophandRam said:
My bumpers both front and rear are from Steelcraft "Elevation" series they are the only manufacturer the E coats and Powder coats their products.
The front one weighs about 300 lbs the rear about 85.
Also have there headache rack that I swap out when I run my topper.
Great fitting bumper well built the factory tow hooks mount to the bumper..I added led bulbs in all of the sensor holes my truck doesn't have that option..
I shopped around got a great price and free shipping..I think 960 for the front and I think 500 for the rear..
Click to expand...
I had Frontier Gear bumpers on my 2018 2500 they look good but rust spots starting showing after 6 months and they were not as heavy duty as the Steelcraft
 
TophandRam said:
My bumpers both front and rear are from Steelcraft "Elevation" series they are the only manufacturer the E coats and Powder coats their products.
The front one weighs about 300 lbs the rear about 85.
Also have there headache rack that I swap out when I run my topper.
Great fitting bumper well built the factory tow hooks mount to the bumper..I added led bulbs in all of the sensor holes my truck doesn't have that option..
I shopped around got a great price and free shipping..I think 960 for the front and I think 500 for the rear..
Click to expand...
Ok thanks!
 
Ewoodard said:
Thanks for the heads up

Do you have any pictures of your front and rear bumpers?
Click to expand...
The front bumper center square section is removable for trucks equipped with front camera.
The lower center long section 3x20 is set up to mount and an led light bar the back of the bumper has tabs welded in to attach the 20" light bar..mine came with it I never installed it.
The fog light holes are made for the led fog lights my truck didn't have those..I added 2018 housings and led bulbs not a direct fit had to bend the tabs and heavy zip ties got a fog light harness and relay kit and tapped it into the parking lights so no switch was required.
Rear bumper has built in side steps, 3 inch round holes for mounting led lights and only one license plate bezel so I added led license plate bulbs..
 

Attachments

  • 20211118_094446.jpg
    20211118_094446.jpg
    622.8 KB · Views: 80
  • 20211118_094458.jpg
    20211118_094458.jpg
    708.2 KB · Views: 81
  • 20211118_094507.jpg
    20211118_094507.jpg
    804.4 KB · Views: 79
  • 20211118_094516.jpg
    20211118_094516.jpg
    941.2 KB · Views: 80
  • 20211118_094540.jpg
    20211118_094540.jpg
    799.1 KB · Views: 77
  • 20211118_094548.jpg
    20211118_094548.jpg
    770.5 KB · Views: 79
TophandRam said:
The front bumper center square section is removable for trucks equipped with front camera.
The lower center long section 3x20 is set up to mount and an led light bar the back of the bumper has tabs welded in to attach the 20" light bar..mine came with it I never installed it.
The fog light holes are made for the led fog lights my truck didn't have those..I added 2018 housings and led bulbs not a direct fit had to bend the tabs and heavy zip ties got a fog light harness and relay kit and tapped it into the parking lights so no switch was required.
Rear bumper has built in side steps, 3 inch round holes for mounting led lights and only one license plate bezel so I added led license plate bulbs..
Click to expand...
Thanks, think this is the route I’m going to go. Just can’t decide between matte black or diamond plate.
 
Ewoodard said:
Thanks, think this is the route I’m going to go. Just can’t decide between matte black or diamond plate.
Click to expand...
The matte is harder to maintain I use a black vinyl coating like for fender trim just to keep it looking good..the color does fade ..
My other truck had the frontier gear diamond plate bumpers they stayed Shiney if you wax them but around the welds rust will pop up so I used black touch up paint.
And also depends on heavy duty you want the bumpers..FG Front 175 lbs and tow hooks are on the frame and won't come thru the bumper without buying extended ones. Steelcraft Front 290 lbs and the tow hooks mount to it and are easy to access.
 
TophandRam said:
The matte is harder to maintain I use a black vinyl coating like for fender trim just to keep it looking good..the color does fade ..
My other truck had the frontier gear diamond plate bumpers they stayed Shiney if you wax them but around the welds rust will pop up so I used black touch up paint.
And also depends on heavy duty you want the bumpers..FG Front 175 lbs and tow hooks are on the frame and won't come thru the bumper without buying extended ones. Steelcraft Front 290 lbs and the tow hooks mount to it and are easy to access.
Click to expand...
How far does that back bumper stick out?
 
Last Saturday marked 3mos since I took him my '21 2500 Megacab. Last Saturday was also the day I yanked off the awful lower front valance and installed the CJC Intercooler guard. Makes such a huge difference in look. I couldn't be happier.

Since taking delivery on 9/11/21:
-Front window tint (match to factory rears)
-Debadged all Limited badging, trim, 4x4 decal & emblem, RAM lettering
-Thuren 2.75" Leveling kit w/Fox 2.0 shocks
-Thuren adjustable trackbar
-Thuren (King) OEM steering damper
-Toyo Open Country R/T 37x12.5x18
-Method ND HV 305 (+18mm)
-CJC Intercooler Guard
-Baja Designs Squadron Fog kit (amber) - PENDING SHIPMENT FROM CJC

megaside.jpg
 

Attachments

  • megafront.jpg
    megafront.jpg
    594.2 KB · Views: 112
  • megafront2.jpg
    megafront2.jpg
    778.5 KB · Views: 119
  • megafront3.jpg
    megafront3.jpg
    620.3 KB · Views: 116
DeepH20Driller said:
Well, new to HD world. I recently bought a 2021 Ram 1500 Laramie. Loved the truck, but it just wasn’t exactly what I wanted. After 3,000 miles on the 1500, just traded it in on this beauty! I absolutely love it!! Inside, it’s exactly like my 1500 but a few extras, like rear heated seats and wireless charger. Other than that, it’s the same, which is what I wanted. I drove a limited the other day and couldn’t get past the steering wheel. The top of steering wheel looked good, but felt like a cheap plastic cover from AutoZone. It felt weird. I love the Night Edition Laramie. What are the “must have” mods I need to start with? Never owned a diesel but look forward to it.
Click to expand...
What size tires are those? Looks great!
 
You must log in or register to reply here.
Back
Top