I just ordered a 2022 Ram Power Wagon

[CJTEX]

I'm actually not a fan of the plate on the dash, didn't order a 75th, just wanted a sweet truck... oh well.

 

[UNifc6pF]

Can you take a close up of the badge on the upper glovebox?

Here to go

 

[UNifc6pF]

How's the build quality? Did you inspect it much prior to accepting it? Color looks awesome by the way. I wanted green but I plan on getting this truck very dirty and rough so I went with billet silver(plus black and silver is badass)....I like your driveway by the way, pretty baller.

Looks to be really good. They had it detailed when I arrived, but I didn’t see anything wrong.

It’s hard to find a bad color on these 75th. The black two tone really changes all the colors. I like it a lot.

I saw a solid olive green 1500, and it didn’t look near as good. The bumper, grill, everything green.

 

[ShadowMTN]

Got home a few hours ago; just snapped some basics to share. I miss the avalanche, but love this truck.

Looks like its time for some 37's!

 

[UNifc6pF]

Looks like its time for some 37's!

I’ve got some Baja Boss MT on order. Hopefully be here this week.

 

[CJTEX]

I’ve got some Baja Boss MT on order. Hopefully be here this week.

I bought 35s but didn't know they were not true 35s... now wishing I went 37 cause they are like 36.5

 

[Rockcrawlindude]

I bought 35s but didn't know they were not true 35s... now wishing I went 37 cause they are like 36.5

First time buying truck tires?

 

[UNifc6pF]

I bought 35s but didn't know they were not true 35s... now wishing I went 37 cause they are like 36.5

Not exhaustive. But here is what I had it narrowed down to, all 37x12.5R17

Cooper	Discoverer AT3 XLT	36.54	12.5	68	D	3525 @ 50 psi	18/32"
BFGoodRich	T/A KO2	36.5"		71.3	D	3525 @ 50 psi	15/32"
Cooper	STT Pro	36.77"	13"	75	D	3525	22/32"
Yokohama	Geoloander M/T	36.8	13.1	76.1	D	3525 @ 50	21/32"
Cooper	Discoverer ST MAX	36.87"	13.1"	79	D	3535 @ 50 psi	18.5/32"
Toyo	Open Country R/T	36.8"	12.5"	78	D	3525 @ 50 psi	18.9/32"
Mickey Thompson	Baja Boss M/T	36.8"	13"	79	D	3525 @ 50 psi	22/32"
Mickey Thompson	Baja Boss A/T	36.7"	13	80	D	3525 @ 50 psi	18.5/32"
Falken	Wildpeak M/T	36.7"	12.5"	81.8	D	3525 @ 50 psi	21/32"
Maxxis	Razr M/T	36.8"	13.1"	81.8	E	3525 @ 60 psi	20/32"
Falken	Wildpeak A/T3W	36.5"	12.9"	82.5	D	3525 @ 50 psi	19/32"
Toyo	Open Country M/T	36.8"	12.5"	84	D	3525 @ 50 psi	21/32"
Goodyear	Wranger MT/R

 

[RubiRam392]

I’ve got cooper STT pros. Mounted and inflated they are about 36.5”

 

[UNifc6pF]

I’ve got cooper STT pros. Mounted and inflated they are about 36.5”

What wheel (mainly width); and what psi - both of those i believe should effect the height.

These are all from manufactuer which all measure a bit different, the STT Pro are measured on 10" , but no indication of the PSI used.

 

[RubiRam392]

What wheel (mainly width); and what psi - both of those i believe should effect the height.

These are all from manufactuer which all measure a bit different, the STT Pro are measured on 10" , but no indication of the PSI used.

Very true. That’s the thing about these tires, until you’ve got them mounted and inflated, you’ll never know how they measure up. My nittos that were on my Jeep were a true 37” tire. These coopers are slightly smaller diameter on the same wheels

 

[freeram]

Got home a few hours ago; just snapped some basics to share. I miss the avalanche, but love this truck.

that is a beautiful rig, congrats...

 

[TKulzer]

I was told it was supposed to ship 10/28 but then the dealer said it was it is at the railyard waiting for a train. Not sure what that will mean but damit, I am growing Impatient. I am hoping it will be here by the 21st as i have a trip planned. I am going to ask for the vin and sticker tomorrow. That should at least prove to me that it is ready.

 

[CJTEX]

I was told it was supposed to ship 10/28 but then the dealer said it was it is at the railyard waiting for a train. Not sure what that will mean but damit, I am growing Impatient. I am hoping it will be here by the 21st as i have a trip planned. I am going to ask for the vin and sticker tomorrow. That should at least prove to me that it is ready.

Seems like power Wagons that are Level 3 are on the back burner. I see a lot of 2's being cranked out for dealers and our spread sheet here.

 

[UNifc6pF]

Seems like power Wagons that are Level 3 are on the back burner. I see a lot of 2's being cranked out for dealers and our spread sheet here.

Mine was a level 3 - just not in the spreadsheet.

 

[UNifc6pF]

Took a couple of pictures of the back side of the beadlock capable wheels. Of course I don't think the angle i took got a clear picture of the offset.

Not sure if the 21 at the top of the pic is it or not. But I think the ET mark is on the right side :/

I'll get some new pics with the 37" tires in a bit.

 

[UNifc6pF]

MT Baja Boss 37x12.5/17 on the 17x8 bead lock capable wheels

No rubbing on any of the plastic with basic driving, haven't had a chance to stretch the suspension a bit. I do see a little rubbing on the control arm while at full turn.

 

[CJTEX]

That's a whole lot of tire. Did your L3 come with the Decal on the bed door? That's the one I wanted to keep and remove the sides. But for some reason looks like the L3s aren't getting it? Unsure why.

 

[CJTEX]

Anyone have a good picture of 35" baja boss on a PW?

 

[Shake N Bake]

Anyone have a good picture of 35" baja boss on a PW?

I would not call these “good pictures” but hope it helps.