Ostracize
Well-Known Member
Gave mine an overdue bath..
Ram Heavy Duty Forum
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
What did you do TO your RAM today?
- Thread starter LamboTexas
- Start date
Installed my Amazon bumper step that @G Mcpherson suggested. Easy peasy. Saved a good bit too VS the Mopar and I don't see a difference. Now to install my wheel to wheel flat running boards I just picked up. Waiting on hardware to arrive.
Davidbt
Active Member
The difference I see is the extra little rubber piece to help kick it down. Pretty cool.
G Mcpherson
Well-Known Member
I coated mine with Bed Liner Spray. Several coats. works well. Glad you found it.
do they stay on when going thru car wash and what brand. would you do it again Looks Great!!
Dangus
Member
- Messages
- 5
- Reaction score
- 46
- Points
- 13
Getting ready for fall/winter camping season. Built a sleeping / storage platform and installed the Softopper. (Shout out to Whiskey Dog Outdoors on Youtube for the platform design - much simpler and lighter than the one I built in my previous truck.) Still have a few things to do, but here's what I've got for now.
RebelForge
Member
I bought the Goopool. I was confused with your post at first, wasn't tracking when I saw those names, haha. Fitment was good. I did have to trim the plastic portion of the bumper that other mentioned it needed. $95 is current price. So far so good.
There are two different Mopar steps I've found. The one I got is similar to part 82215842AI. The other is the rectangle step I believe you're referring to. I would have been happy with either for that price.
HodgeDodge
Active Member
- Messages
- 46
- Reaction score
- 202
- Points
- 33
HodgeDodge
Active Member
- Messages
- 46
- Reaction score
- 202
- Points
- 33
Today i installed the Bilstein 2” level kit w/5100’s hardly any difference from the Previous Jeeps i put lift kits on. Then adjusted my headlights after rides pretty much the same if not better. Too dark for a picture.
ChillxPoint
Active Member
- Messages
- 131
- Reaction score
- 198
- Points
- 43
Where’d you tap for power or did you just run something from the battery?
BigHorn3500
Active Member
I set up a battery tender to run through my 7 pin trailer plug it works great easy back in to garage plugin the trailer connector and plug in the tender. Plus the last two feet of the charging cord unplug's so if you drive of forgetting to un plug the trailer connector the end of the charge wire will unplug from the tender no damage ! connect positve to pin #4 and negative to pin #1
Attachments
BigHorn3500
Active Member
I am also receiving my silicone tow hook covers today. I saw them in a post on this forum great idea ! from BigRam25
Getting ready for fall/winter camping season. Built a sleeping / storage platform and installed the Softopper. (Shout out to Whiskey Dog Outdoors on Youtube for the platform design - much simpler and lighter than the one I built in my previous truck.) Still have a few things to do, but here's what I've got for now.
How are you liking that soft topper? Been considering that topper or the flated topper...but not sold on either one as of yet.
2K6TBSS
Member
What light kit did you end up getting?
2K6TBSS
Member
I just got my step yesterday, was too dark last night when I got home to install it. Hopefully tonight will be a different story.
Dangus
Member
- Messages
- 5
- Reaction score
- 46
- Points
- 13
HodgeDodge
Active Member
- Messages
- 46
- Reaction score
- 202
- Points
- 33
