What's new
By:
Ram Heavy Duty Forum

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

What did you do TO your RAM today?

brutal said:
index.php


That's gonna leave a mark. Will not buff right out.
Click to expand...
Makes me want my strip club to hurry up and reopen...Those ladies are tough bishes!
 
Rampelstiltskin said:
Are all the AirBag kits double bags or are there ones with singles, same height and girth (giggle) but just the one bag?
Click to expand...

There's only one air chamber.

I've never seen a "single" bag setup for a truck. AFAIK, they are "split" like that to keep the diameter size down when compressed.
 
Added 3M clear film on my hood and bumper. I made templets from a plastic sheet then cut it out from a 12" X 72" roll. I have the film on the lower 8" of the hood because on my previous 2016 ECO diesel all the rock chips are on the lower 4" of the hood. It came out pretty good! Hopefully this will help. I also added Mopar HD mud flaps today.
IMG_1645.JPGIMG_1644.JPGIMG_1646.JPG
 
TogaLock77 said:
Would you make more of these for payment?
Click to expand...
If you want just the aluminum flange I can make a few at no charge other than maybe some shipping costs. I have a lot of aluminum flat bar scrap laying around that I don’t have certs on so it would just get recycled anyway.
The real costs is in the hardware. I used a Milton style quick connect, about $15, and another $10 or so in some ¼-20 stainless screws and brass air fittings.
I can knock out a few next week for any who want.
 
DownShiftz said:
If you want just the aluminum flange I can make a few at no charge other than maybe some shipping costs. I have a lot of aluminum flat bar scrap laying around that I don’t have certs on so it would just get recycled anyway.
The real costs is in the hardware. I used a Milton style quick connect, about $15, and another $10 or so in some ¼-20 stainless screws and brass air fittings.
I can knock out a few next week for any who want.
Click to expand...
Where did you mount the compressor? Very nice install. I would be down for one of the kits. Let me know how to pay you.

Sent from my SM-N975U using Tapatalk
 
@DownShiftz - nice, clean install!

I too am interested in learning what you did with the compressor, and acquiring an aluminum flange from you. What do you think about installing the flange behind the panel, and having a 1" or so hole for the quick connect to enter the bed? that would reduce the depth of the connector into the bed. I'd hate to mess something up because something was rolling around in the bed.
 
brutal said:
There's only one air chamber.

I've never seen a "single" bag setup for a truck. AFAIK, they are "split" like that to keep the diameter size down when compressed.
Click to expand...
Thanks, I was asking because the bags on my "big" truck are all single /not stacked. About the size of one of those institution sized can of beans. I know you've seen them. again, Thanks
 
HORam said:
Where did you mount the compressor? Very nice install. I would be down for one of the kits. Let me know how to pay you.

Sent from my SM-N975U using Tapatalk
Click to expand...
All components are mounted to the passenger side frame rail. The compressor is just to the right of the ECU, you can see the air intake line in the photo of the ECU. There is plenty of real estate under our trucks so we have a lot of mounting options.
 
Last edited:
Swapped out the giant ram plastic chrome tailgate badge for the giant black plastic ram badge. This thing is huge! If I had the time I’d button this up and just have a flat panel. Maybe in the future if I keep her that long. 7ACF1C3D-27F3-42BE-A8A8-03D55061D5AA.jpeg
 
DownShiftz said:
Swapped out the giant ram plastic chrome tailgate badge for the giant black plastic ram badge. This thing is huge! If I had the time I’d button this up and just have a flat panel. Maybe in the future if I keep her that long.

View attachment 6545
Click to expand...

Where did you source the black emblem? Thanks!
 
You must log in or register to reply here.
Back
Top