What did you do TO your RAM today?

[dieselscout80]

mine was about 1/2" too long, but I had a short piece of 1x2 wood that was the perfect lever to help it into place. I had the axle end bolt in first...

View attachment 73145

What part number is that 5100 shock?

When I look at shock plus/warehouse they only show a 5100 setup with two 5100.

I wonder if the two fit on the factory single kicker shock setup?

 

[johanh13]

I ordered this setup from Geno's Garage https://www.genosgarage.com/product/ram-cummins-mopar-power-hop-damper-kit-phopkit/bilstein-rear

 

[oledirteh]

at 96k did a trans service. new filters and fluid. While there did a tcase drain and refill. New orings on the ATS bypass. Trans pan was clean of anything. filters were clean as well. trans looked new. lets hope it stays that way

dont even feel it shifting hardly now. was long over due.

 

[dieselscout80]

I ordered this setup from Geno's Garage https://www.genosgarage.com/product/ram-cummins-mopar-power-hop-damper-kit-phopkit/bilstein-rear

Thanks, but I already have the brackets.

 

[johanh13]

What part number is that 5100 shock?

When I look at shock plus/warehouse they only show a 5100 setup with two 5100.

I wonder if the two fit on the factory single kicker shock setup?

Thanks, but I already have the brackets.

You are welcome (the attached screenshot has the individual part numbers...)

 

[Thompsre08]

Got new Falken Wildpeak AT4w’s installed and found 3 sheared lugs on the front axle so replaced all 16 on the front out of caution

 

[clownpocket]

Got new Falken Wildpeak AT4w’s installed and found 3 sheared lugs on the front axle so replaced all 16 on the front out of caution View attachment 73163

Nice! I just went with the AT4w in 295/65R20. They are awesome so far.

 

[AZCummins]

Got new Falken Wildpeak AT4w’s installed and found 3 sheared lugs on the front axle so replaced all 16 on the front out of caution View attachment 73163

Emblems matching your wheels is a nice touch!

 

[johanh13]

Nice! I just went with the AT4w in 295/65R20. They are awesome so far.

you got any photos?

 

[Wholeo]

Replaced the air filter with the recommended AB filter I found at a small dealership where I was working at in Sidney, Ne. I had a Donaldson filter I took delivery of that ended up being just as fellow member mbarber84 described, glue strips and made in Mexico. Didn't bother sending it back, dropped it in my brother's 2018, didn't look like he had changed his old filter in 5 years, his truck is deleted. I also changed the cabin air filter, I was really surprised about how much dust came out when I took the cover off.

 

[clownpocket]

you got any photos?

 

[RockaRhyme]

Just replaced the chrome trim around the grill. I don’t mind chrome, but it was a bit much. Need to give the poor girl a bath.

 

[dieselscout80]

You are welcome (the attached screenshot has the individual part numbers...)

Well I guess I need to read better.

Thanks again

 

[johanh13]

Well I guess I need to read better.

Thanks again

You are welcome!

 

[woody284]

Just replaced the chrome trim around the grill. I don’t mind chrome, but it was a bit much. Need to give the poor girl a bath.

View attachment 73181

Do you have any before and after pics. What parts did you buy or paint

 

[G Mcpherson]

Installed my new Thuren rear Multi rate coils today. Also End links and Fox Shocks. Much smoother now. Pic's to follow. Just need to get the Rear Track Bar to get rid of the Wag.

 

[G Mcpherson]

Noticeable difference with the change. Gained 1" in the Rear with these coils.

 

[johanh13]

Welded in carli front lower shock mounts & carli upper isolator supports, installed carli 2.5" coils & carli king shock.

 

[Thompsre08]

Emblems matching your wheels is a nice touch!

I love the subtle details haha

 

[NHOverland]

Did the Carli HD ball joints the past 2 days... What a lovely set of pure steel goodness! Short video HERE.