What did you do TO your RAM today?

[Caleyvtwin]

Had 35x12.5r17 Pro Comps installed. The shop shattered one of my TPMS sensors. But, should be getting that swapped out tomorrow. The shop started at door tag pressure, but I have since aired down to 50f and 45r. Tread contact looks about right, but I have not chalked it yet.

View attachment 31020
View attachment 31021
Also installed bumper plugs into the front license plate holes.

View attachment 31022

The Hillman Group 58128 3/8-Inch Black Nylon Hole Plug, 20-Pack https://smile.amazon.com/dp/B00MN6G...t_i_1301CGDZ1Z3MAREYJ7GA?_encoding=UTF8&psc=1

Finally, I installed the Kaodtech bypass. I am embarrassed to say that it took me a little bit to figure out that it was just a bridge cable across the two blocks and that any open position would work.

This weekend I will change the TPMS thresholds and change the tire size using Alfaobd.

What fender flares are those?

 

[Vdrsnk]

Paint matched tailgate emblem installed.

 

[Aaandroger]

What fender flares are those?

OEM power wagon fender flares

 

[Caleyvtwin]

Had an extra set of wheels powdercoated to be used as a winter set...even though the truck hasn't been built yet!

That’s looks good.

 

[phrogman]

Got my bed Rhino lined.

Sent from my SM-G973U using Tapatalk

 

[NordicNevs]

Went camping

Sent from my iPhone using Tapatalk

 

[Caleyvtwin]

yup..

View attachment 36102

What setting did you change in AlfaOBD?

 

[QuattroCS]

What setting did you change in AlfaOBD?

check out this sticky thread, you may find your answer

Links to solved DIY Sales code mods and common AlfaOBD settings

Here's a roll-up thread for posting links to any successful DIY Sales code mod and AlfaOBD settings required (or not) and common AlfaOBD settings only mods. This is NOT a How-To or Q&A for AlfaOBD or discussion thread. Links and settings only please. TL;DR If you're not here to contribute, you...

hdrams.com

 

[Caleyvtwin]

Got the tailgate dampener installed along with factory bed step.

Almost went with the AMP step but I like how nicely the factory step tucks up.

Do you know what the part number is on the step?

 

[762fmj]

Do you know what the part number is on the step?

This one is for an OEM clone, there's speculation that it's the same. Mine had a Mopar instruction sheet in the box.

https://www.google.com/url?sa=t&source=web&rct=j&url=https://www.amazon.com/MITZONE-Replace-82215842AG-82215842AE-82215842AF/dp/B09KZXLNP6&ved=2ahUKEwjNl8iQr6L6AhWUlmoFHbYRD3IQFnoECA4QAQ&usg=AOvVaw1gd-Yk-EBf2RKEFyn7Il-h

 

[Caleyvtwin]

This one is for an OEM clone, there's speculation that it's the same. Mine had a Mopar instruction sheet in the box.

https://www.google.com/url?sa=t&source=web&rct=j&url=https://www.amazon.com/MITZONE-Replace-82215842AG-82215842AE-82215842AF/dp/B09KZXLNP6&ved=2ahUKEwjNl8iQr6L6AhWUlmoFHbYRD3IQFnoECA4QAQ&usg=AOvVaw1gd-Yk-EBf2RKEFyn7Il-h

Thank you.

 

[Vdrsnk]

Bakflip Revolver X2 installed. Instructions and quality of product were ver nice. Install was pretty easy. I am usually never satisfied with any bedcovers I buy, first time using one of these we will see how I like it. Looks nice anyway, that’s all I can say so far.

 

[Grateful Dad]

Do you know what the part number is on the step?

This was the updated part number when I bought mine, it has the “new” bracket.

 

[Illymost]

Had a local shop put on the AEV bumper and brush guard. I’m happy with it. Might have to go Carli level and bigger tires next year, though. I think I have a disease, ha.

 

[Linked4door]

Started to test fit some rear seat spacers to lift the rear seats. I didnt want to use the spacers that come with the box since they are made of mdf which doesn't seem safe. I think the 1" height spacer shown will be too short, so I need to go upto 1.5" or 2" total once the new aluminum stock arrives.

 

[2500Helena]

Why?

 

[Linked4door]

Why?

Replacing rhe factory sub with dual 12's

 

[slowindown]

Made a way to be able to load my golf cart with rear seat and still be able to close the tailgate and pull the camper with my long bed 3500. I cut and hinged a pair of old car ramps (rhino) I had. I’m using 10’ folding heavy duty Titan ramps to load/unload.

 

[NHOverland]

Building a 4 corner air system. Less to roll up, no need to stand in the rain to read air pressure, and no need leave your doors or hood open any more. ARB blue tooth or ARB Linx controlled PRV system. Question remains... Red or Black Lines?

 

[H3LZSN1P3R]

Building a 4 corner air system. Less to roll up, no need to stand in the rain to read air pressure, and no need leave your doors or hood open any more. ARB blue tooth or ARB Linx controlled PRV system. Question remains... Red or Black Lines?

View attachment 44694
View attachment 44695

Red so its easily spotted plus the red on black has always been a good look just after blue on black