What did you do TO your RAM today?

[Grateful Dad]

She needs a foam cannon. She’d have a blast.

Ha! I see what you did there……..

 

[Jsboening]

We have one but I think the pressure washer would put her on her ass

Didn’t think of that. I just have a small electric so it’s pretty tame.

 

[Nosty10s]

night edition tails..

View attachment 35950

Looks awesome, do you happen to have the part number?

 

[elephantrider]

yup..

 

[Ickabod]

Those speakers make a huge difference. Transformed the sound of the Alpine system. It's awesome.

It is such and easy and inexpensive upgrade that makes the music sound much crisper. I do plan on upgrading the door speakers also, but that will have to wait until I have more time after boating season!

 

[AEV_CUMMINS]

Let her eat from a roll of about 20km/h and that C43 had no idea what it got itself into

Crazy what a free flowing Cummins w/120hp tune will gobble up on the road. Reminded me of my street racing days with my GTR, but had to remind myself I was ''all grown up now''..

 

[NHOverland]

NH Overland RAM Rear Under Seat Compressor Mount with Pressure Control and 4 Tire Fill completed. This makes airing down and up a breeze!

 

[whitexc]

Dropped the truck off for State Inspection and an alignment to Thuren specs @ 8.4k miles. Have had it one year tomorrow. Gave it a nice handwash this morning and scrubbed my Husky mats. Really like those mats.

Sent from my SM-G996U using Tapatalk

 

[G’Dave]

Well, I replaced my dash corner speakers with Kicker speakers. The Metra harnesses made it a fast 5 minute swap.
I also mounted my radar detector to the mirror with my bellmount mount. I ran a direct wire into the liner, to the A pillar, to the foot well, where I wired it into the wiring harness for my AUX switches. Now I can turn on/off the detector with AUX 3 switch.

Did you have any issues with Active Noise Cancellation?
I've read in another thread on this forum that it can be an issue when changing the door speakers. The OP from the other thread reported a horrible droning sound with the new speakers, even when the radio was turned off. It went away when he reinstalled the OEM door speakers. I'm wondering if there are ANC problems encountered when changing the dash speakers?

I have a Laramie "base model" on the way, and will need to do something about the Alpine system. My 2014 Tradesman has a custom 5 channel 500w amp, 200w subwoofer, and 50w speakers in the doors (plus appropriate matching tweeters in the dash).

 

[Ickabod]

Did you have any issues with Active Noise Cancellation?
I've read in another thread on this forum that it can be an issue when changing the door speakers. The OP from the other thread reported a horrible droning sound with the new speakers, even when the radio was turned off. It went away when he reinstalled the OEM door speakers. I'm wondering if there are ANC problems encountered when changing the dash speakers?

I have a Laramie "base model" on the way, and will need to do something about the Alpine system. My 2014 Tradesman has a custom 5 channel 500w amp, 200w subwoofer, and 50w speakers in the doors (plus appropriate matching tweeters in the dash).

I have had no issues with the dash speaker replacements. I have swapped the dash speakers on my 2019 Ram 1500 Laramie and my 2022 Ram 2500 with no issues. One thing to note was I found in the 1500, that the left speaker was wired out of phase, so I swapped the wires on the harness to correct this. I do not expect any issues replacing the door speakers this Fall, but I will keep this in mind.

 

[G’Dave]

I have had no issues with the dash speaker replacements. I have swapped the dash speakers on my 2019 Ram 1500 Laramie and my 2022 Ram 2500 with no issues. One thing to note was I found in the 1500, that the left speaker was wired out of phase, so I swapped the wires on the harness to correct this. I do not expect any issues replacing the door speakers this Fall, but I will keep this in mind.

Here is a link to the thread:-

Active noice cancelling and changing speakers

Active noice cancelling and changing speakers

I have a 2019 ram 2500 6.4 with 400 miles on it. Last night I changed the 4 door speakers to alpine type E 6x9 at 4 ohms. This morning going to work the truck had a horrible droning noise around 2k rpm in all gears. AT FIRST I suspected MDS, however my exhaust is stock and when I put the truck...

r.tapatalk.com

Sent from my iPhone using Tapatalk

 

[RichOutlaw]

I tinted my front door windows.

 

[DeepH20Driller]

Installed Course MotorSports phone holder/wireless charger and hard wired it. Also, AJT shift knob and radio knobs.

Installed Boost Auto tinted switchback mirror lights and they look better than pictures. I will take pics tomorrow and post.

 

[rw4363]

Installed KC Cyclone lights under the hood. Made my own wiring harness and tapped into the aux switches. I did break all of the hood insulation retainer pins, had to order replacements.

 

[Jimmy Dean]

Added remote start following this thread here: https://hdrams.com/forum/index.php?...ed-to-2020-tradesman.2401/page-31#post-186477

 

[ElkRam]

Most expensive mod yet for me, I filled up the tank!


2022 Ram 3500 SRW Limited Longhorn. 6.7 HO Pearl white.
Ordered 10/20/2021, delivered 4/14/2022

 

[blbrown]

Installed KC Cyclone lights under the hood. Made my own wiring harness and tapped into the aux switches. I did break all of the hood insulation retainer pins, had to order replacements.

Is that the stock hood insulation or custom, looks great

 

[rw4363]

Is that the stock hood insulation or custom, looks great

Yes, that is the stock insulation.

 

[Havoc Powersports]

ordered 5' black exhaust tip, 12" screen protector, trifold soft bed cover, bolt receiver lock, traxda 1.5 level kit, as I wait for the truck to get in.

Removed aux fuel tank from current truck 2019 ram 2500, and started to clean out all the storage pockets to get it ready to trade in.

 

[hunterjoe]

Well, didn't DO anything to the truck today, but do have wheels on order (Anthem Rogue 20x9 +18) and the 35x12.5 Ridge Graps are in. Wonder which will show up first, the wheels that are on backorder or the truck. Ha ha. Said the wheels should be back in stock mid-May. Truck is D1 with 4/30 ship date. Timing seems to be pretty close.