What's new
By:
Ram Heavy Duty Forum

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

What are people using for leveling/lift kits?

put a 2.5" carli in my 2022 tradesman, running 37" wildpeaks on 18" method wheels. minor trimming up front to allow zero rub with anything I do. After install my axle was close to 1" off center. Carli trackbar was 6-8 weeks backorder so I got a rough country one for less than $200 and it worked perfect. Also added airlift 5000lb bags to the rear for my sled deck in the winter and for towing my trailer. Overall the ride is night and day over stock, my wife complains that the truck rides better than her Durango.

6.jpg
8.jpg
 
Today I learned that the people who make sumosprings make super coils for our trucks that have extra load capacity and 2” front 0” rear lift.

So, now I am thinking I want their coils with my 1” rear spacer I haven’t installed yet
 
Rockcrawlerdude said:
Today I learned that the people who make sumosprings make super coils for our trucks that have extra load capacity and 2” front 0” rear lift.

So, now I am thinking I want their coils with my 1” rear spacer I haven’t installed yet
Click to expand...
Yes they have been making springs since 09 when the 1/2 tons started getting coils they work good
 
Rockcrawlerdude said:
Today I learned that the people who make sumosprings make super coils for our trucks that have extra load capacity and 2” front 0” rear lift.

So, now I am thinking I want their coils with my 1” rear spacer I haven’t installed yet
Click to expand...
Do you have the Thuren adjustable rear coil spacer? I was thinking of going with the 3" leveling kit for the hemi but wasn't sure if I would like the "dead level" look but, I want the height and thought the rear spacer would be a good/cheap option.
 
NightTrain said:
Do you have the Thuren adjustable rear coil spacer? I was thinking of going with the 3" leveling kit for the hemi but wasn't sure if I would like the "dead level" look but, I want the height and thought the rear spacer would be a good/cheap option.
Click to expand...
I don’t. I have 1” traxada rear spacer that I still haven’t installed.
 
Question to those who have lifted their 3500's using the Carli 2.0 3.25" lift Commuter version. I plan to put this on a new 2023 Limited SRW SB HO I ordered (when it comes in). What did you guys do regarding the Sway Bar? Nothing, drop-down brackets, or the Carli torsion bar?
 
Just finished installing the Thuren 3” front coils with Fox shocks and 1” Thuren spacer in the rear-track bar too. Install was easy and quicker than I expected. I’ll go through winter before swapping to bigger tires
 

Attachments

  • 19D0D3D8-D683-46A1-846A-4E227D1BDA07.jpeg
    19D0D3D8-D683-46A1-846A-4E227D1BDA07.jpeg
    570.7 KB · Views: 120
  • 5FD9FE39-B396-41E3-97EA-6473E6223D52.jpeg
    5FD9FE39-B396-41E3-97EA-6473E6223D52.jpeg
    416.7 KB · Views: 118
  • CA95CA2D-66DC-435A-A6FB-CE9D57B32426.jpeg
    CA95CA2D-66DC-435A-A6FB-CE9D57B32426.jpeg
    489 KB · Views: 118
NightTrain said:
Just finished installing the Thuren 3” front coils with Fox shocks and 1” Thuren spacer in the rear-track bar too. Install was easy and quicker than I expected. I’ll go through winter before swapping to bigger tires
Click to expand...

Killer looking NightTrain!!! I have seen the Theren 2.75" front coil but not the 3", is this something new? Im in between the Thuren 2.75" front and 1" rear soft ride vs the Carli 3.25 Commuter set up....
 
Smittys2500RAM said:
Killer looking NightTrain!!! I have seen the Theren 2.75" front coil but not the 3", is this something new? Im in between the Thuren 2.75" front and 1" rear soft ride vs the Carli 3.25 Commuter set up....
Click to expand...
The 3” is specific to the Hemi models. I was thinking of going with the 2” but the 25 year old in me said go bigger. I don’t think you can go wrong with either brand.
 
NightTrain said:
Just finished installing the Thuren 3” front coils with Fox shocks and 1” Thuren spacer in the rear-track bar too. Install was easy and quicker than I expected. I’ll go through winter before swapping to bigger tires
Click to expand...
Just ordered my 3" thuren coils for the front last week. Should be in tomorrow or friday and being installed next week. I think I'm going to like the dead level look. I'm also picking up a set of 20" wheels and putting 35s on it. That should give it a nice stance. I just need running boards for the wife.
 
chas0218 said:
Just ordered my 3" thuren coils for the front last week. Should be in tomorrow or friday and being installed next week. I think I'm going to like the dead level look. I'm also picking up a set of 20" wheels and putting 35s on it. That should give it a nice stance. I just need running boards for the wife.
Click to expand...
FYI - after installing the 3" coils, my truck was low in the back by 3/4". Every truck seems to be a little different so, you might be dead level after install. I bought the adjustable spacer just in case and glad I did.
 
NightTrain said:
FYI - after installing the 3" coils, my truck was low in the back by 3/4". Every truck seems to be a little different so, you might be dead level after install. I bought the adjustable spacer just in case and glad I did.
Click to expand...
Yeah if it's low I'll buy the spacer. I'm going to get an adjustable track bar shortly, might remove the sway bar too. From what I've read the mega cabs with the long wheelbase and added weight sit dead level but I'll have to wait and see.
 
Smittys2500RAM said:
Killer truck SCAMHD!! I just got the Thuren 2.75" front and 1" rear with the 2.5 Kings. How much trimming was required for the 37s? Love those TR wheels but damn spendy.....
Click to expand...
What wheels are you running and what is their offset?
 
You must log in or register to reply here.
Back
Top