What's new
By:
Ram Heavy Duty Forum

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Stock wheels and 37's. Assignment complete

Your truck looks great! You probably won't rub until you flex it out while turning.
 
I would be really surprised if it does not rub off road. Heck my 35's on AEV wheels rub at full turn backing up.
 
jadmt said:
I would be really surprised if it does not rub off road. Heck my 35's on AEV wheels rub at full turn backing up.
Click to expand...
I've got plenty of room with this current set up. Maybe the 2022 is different somehow
 
Ridered67 said:
I've got plenty of room with this current set up. Maybe the 2022 is different somehow
Click to expand...
It would be great if the did. Your PW articulinks flex better than non Power Wagon trucks. Maybe that helps.

For reference, I can make these rub at the back of the front fender.

Front Carli sm.jpg
 
Nice - I wanted those Geolanders, but couldn't source them easily - ended up with the MT Baja Boss MT - I rub on the control arms at full turn; and then when turning and flexing a little. Need to track it down.
 
UNifc6pF said:
Nice - I wanted those Geolanders, but couldn't source them easily - ended up with the MT Baja Boss MT - I rub on the control arms at full turn; and then when turning and flexing a little. Need to track it down.
Click to expand...
I bought them right off ebay, plenty available. Do you have anniversary rims like me?
 
With stock rims, they probably wont rub.
For those with aftermarket rims that say they rub, are your rims the stock offset and width? If not, that's probably the problem.
As for balance, I've always used balance beads on 35's and 37's with no issues. If you have issues, it's probably the tires are defective. Been there, done that.
 
Ridered67 said:
I bought them right off ebay, plenty available. Do you have anniversary rims like me?
Click to expand...
Nice - didn't think of that - was at a local shop and they were calling their sources.

Yeah I have the beadlock capable rims.
 
Have you had a chance to flex them yet?

Id like to know if they rub when fully flexed, sway bar disconnected, and full turn at each lock.

Thinking of going to 37's.

Also would like to know how she is power wise once you recalibrated for tire size. And if you tow, any difference.
 
You must log in or register to reply here.
Back
Top