Ram Heavy Duty Forum
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Running board fitment 2018 to 2024
- Thread starter Clark89
- Start date
H3LZSN1P3R
You're doing it wrong
Yes
Killadrilla91
New Member
- Messages
- 2
- Reaction score
- 0
- Points
- 1
I looked up an 18 limited and it said that the running boards won’t fit a 2024 tradesman. And thoughts.
H3LZSN1P3R
You're doing it wrong
The cabs are the same the internet will rarely say yes because of the slight design change
4FishLimit
Active Member
- Messages
- 91
- Reaction score
- 144
- Points
- 33
Another ‘5th’ gen owner checking in with 4th gen running boards.
I picked up my wheel to wheel boards used for like $100. Person I bought them from said they were off a 2016. I had to source new hardware (rivet nuts and bolts), but they bolted right up, which I expected they would.
The overall cab structure has been the same since 2011 on the HD trucks.
I picked up my wheel to wheel boards used for like $100. Person I bought them from said they were off a 2016. I had to source new hardware (rivet nuts and bolts), but they bolted right up, which I expected they would.
The overall cab structure has been the same since 2011 on the HD trucks.