Rubber window weather strip solution

[Bugdude]

Does anyone have a solution for this

 

[Poolmonkey]

Don’t mess with them, I did and it made things worse. I tried to ignore the issue but people kept asking WTH..
I finally replaced them with cheap Zon/Bay, I forget which, hoping that the materials might be different than factory.
I haven’t noticed the new doing anything but the truck doesn’t leave the garage much this time of year.
The replacement felt more plastic and less rubbery…meh.

 

[DammitDave]

Crazy thing I just notice my 2020 doing the same thing this past weekend. I just figured it was from sitting in the hot sun that day.

 

[Poolmonkey]

Crazy thing I just notice my 2020 doing the same thing this past weekend. I just figured it was from sitting in the hot sun that day.

It is, super bad on my black truck in Vegas.

 

[Firebird]

I loosened the rear screw and adjusted mine a bit, they sit more level now.

 

[NMRam]

They’ve done that since the 4th gens came out in 09. No real solutions, seems like the more folks mess with them, the worse they get.

 

[DammitDave]

I loosened the rear screw and adjusted mine a bit, they sit more level now.

Cool, I'll try that !

 

[Chris1911]

I installed these about a month ago. They look good and the cost is way better than the almost $400 for a set from Mopar.

https://www.amazon.com/gp/product/B0C2RJCHWB/

 

[Bugdude]

I installed these about a month ago. They look good and the cost is way better than the almost $400 for a set from Mopar.

https://www.amazon.com/gp/product/B0C2RJCHWB/

A couple of questions for you.
Are they rubber like the OEM?
How hard to remove and replace?

 

[Firebird]

I installed these about a month ago. They look good and the cost is way better than the almost $400 for a set from Mopar.

https://www.amazon.com/gp/product/B0C2RJCHWB/

I have used those on past trucks myself

 

[Chris1911]

A couple of questions for you.
Are they rubber like the OEM?
How hard to remove and replace?

They are very similar to the oem ones. Only took maybe 10 or 15 minutes to swap them all out. Once i figured out the best way to release the first one, the others went fast.

 

[Poolmonkey]

They are very similar to the oem ones. Only took maybe 10 or 15 minutes to swap them all out. Once i figured out the best way to release the first one, the others went fast.

My cheapies got seriously baked in the sun and 117* today, no warping.