What's new
By:
Ram Heavy Duty Forum

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Profile pictures of your toppers on your trucks

MSundet

MSundet

Active Member
Messages
197
Reaction score
172
Points
43
I’m looking for all the profile pictures that I can have different toppers, looking to order one frameless glass, something that looks like it is 100% stock.

Can you all post pictures of your toppers on your truck and label what top or what model etc.

I just bought a 2020 3500 And I am looking for a topper that I can run around all year with go on road trips with etc. I really do not care about price I just want it to look perfect.

ab7eda15de9da7e7aab982e39d0718ec.jpg



Sent from my iPhone using Tapatalk
 
MSundet said:
Did the cargo camera stay ? I really like your topper!


Sent from my iPhone using Tapatalk
Click to expand...

Yes, this is not a great pic, not much of a view. You can see through the window of the cap about 6ish inches of the bed. I was kinda bummed but wanted the bed coverage when traveling more
6BEC4670-1A17-44F3-AEAA-E41736D9EC74.jpeg
 
Tmherd said:
Yes, this is not a great pic, not much of a view. You can see through the window of the cap about 6ish inches of the bed. I was kinda bummed but wanted the bed coverage when traveling more
Click to expand...

How much clearance is there between the camera/brake light and the cap? My dealer told me I had to replace my CHMSL with the non-camera version. I'd love to swap back if the factory one fits fine.
 
jsalbre said:
How much clearance is there between the camera/brake light and the cap? My dealer told me I had to replace my CHMSL with the non-camera version. I'd love to swap back if the factory one fits fine.
Click to expand...

About an Inch, plenty of room. I opted for the fold in window in the cap so I could clean the windows easier C13CFCEF-91A8-4850-93C1-4DB676DA6F8D.jpeg930F4CBF-833C-44F2-A834-23F9ABC61F4C.jpeg
 
MSundet said:
That picture makes me want to buy that one !!! The must have done the test fitting prior to the release to the market.


Sent from my iPhone using Tapatalk
Click to expand...


I would say you can’t go wrong with the Leer 100XL. I’m very pleased, enough it’s my 2nd Leer 100XL. I had one on my previous truck a 2010 GMC Sierra 1500. They offer many options. I opted for the fold in sliding window and carpeted headliner but there are many to choose from. https://www.leer.com
 
Tmherd said:
I would say you can’t go wrong with the Leer 100XL. I’m very pleased, enough it’s my 2nd Leer 100XL. I had one on my previous truck a 2010 GMC Sierra 1500. They offer many options. I opted for the fold in sliding window and carpeted headliner but there are many to choose from. https://www.leer.com
Click to expand...

200XQ SPORT any thoughts on this?? lol

100XL is the one I think looks best! For sure !


Sent from my iPhone using Tapatalk
 
MSundet said:
200XQ SPORT any thoughts on this?? lol

100XL is the one I think looks best! For sure !


Sent from my iPhone using Tapatalk
Click to expand...


I do like the 200XQ. It wasn’t available when I purchased mine. I’m pretty sure it will cost quite a bit more than the 100XL but haven’t priced them. I went with the 100 based mostly on previous experience. I feel the 100XL looks great for the money. Just my opinion though.
 
Can you guys who responded to this thread please list what you paid for your caps?
 
Too damned much if you ask me, but what can you do?

All the fasteners and fittings were loose so all the windows and back door leaked like a sieve....
I molded and added some kydex to extend out the ends of the plastic lip that covers the top of the tailgate
Put some RTV in between that same lip and the door to stop water from rolling back into the bed
Still need some gasket around the tailgate proper

ARE MX base is about $2K mine is about $3K but I added the following:
Tilt down, sliding front window
Windoor (both sides)
Headliner
Yakima rack with CoreBar
 
Softopper, fits great. Acts like a boat Bimini top with tubes on the inside. You can roll the sides and back up. Or leave them down. Fold the top and it Stowe’s under the rear window or pull two pins and remove the whole set up and stow it in the Bimini bag.
very light one person can remove and install,
Under $900.00 shipped to the door.
 

Attachments

  • ED4ED7EB-7A77-415C-AA16-1CFC35C9641E.jpeg
    ED4ED7EB-7A77-415C-AA16-1CFC35C9641E.jpeg
    620 KB · Views: 59
B757dr said:
Softopper, fits great. Acts like a boat Bimini top with tubes on the inside. You can roll the sides and back up. Or leave them down. Fold the top and it Stowe’s under the rear window or pull two pins and remove the whole set up and stow it in the Bimini bag.
very light one person can remove and install,
Under $900.00 shipped to the door.
Click to expand...
I had a Softopper on my 2015 1500 5'7" bed. I miss it, it was very handy to keep it on the truck all the time folded down. I'll be getting one to fit my 2500 soon. They're really nice.
 
MSundet said:
How does this fit where the camera is at for the bed?


Sent from my iPhone using Tapatalk
Click to expand...

The bed camera will be basically unusable... you can scroll up the thread to see what it looks like.
You will need at least 3/4" of space between the the CHMSL and the topper or body flex will crack the CHSML housing.. someone else posted about that problem.
 
You must log in or register to reply here.
Back
Top