Power wagon wheel fitment

[FarmerFred]

Does anyone know if the stock 17" Power Wagon wheels will fit on my 2025 2500 Limited diesel? I'm looking to set up a winter wheel/tire package. I measured the calipers against my stock 20" wheels and I think the 17" wheels might rub, but was wondering if anyone has tried this before? I'm guessing the Power Wagon brakes/calipers might be slightly smaller, but not sure. Please advise and thanks in advance.

 

[G Mcpherson]

I believe that they will fit. They share the same bolt pattern. The 17" wheel comes std on a Tradesman also.

 

[MegaCabn]

Does anyone know if the stock 17" Power Wagon wheels will fit on my 2025 2500 Limited diesel? I'm looking to set up a winter wheel/tire package. I measured the calipers against my stock 20" wheels and I think the 17" wheels might rub, but was wondering if anyone has tried this before? I'm guessing the Power Wagon brakes/calipers might be slightly smaller, but not sure. Please advise and thanks in advance.

They fit. The tire shop just has to be careful where they mount the wheel weights or they will hit the calipers. IIRC they have to be mounted towards the OUTSIDE of the wheels, closer to the face. If possible, ust be sure to find a tire shop that is familiar with mounting/balancing 17s for 2500s... ask me how I know lol I've had these on for a few thousand miles with no problems. Also, these are 35x12.50s and don't rub, stock height suspension.

 

[cars91]

I have them on my 3500 SRW and they work just fine. In fact the offset is a bit better than the other stocks. 305/70r17 without any rubbing.

 

[HodgeDodge]

Yup i went with AEV 17” wheels and they used hammer on weights on the inside lip to balance its close but no rub at all.