OEM Running boards sources

[Jeff Pangle]

Just purchased a 2025 2500 crew cab, Night edition Laramie with the 6.7. Need running boards.
Checking with the local Ram parts dealer and he can't source wheel to wheel black OEM running boards for this truck yet - odd.....
He said post on here and see if anyone knew of a OEM supplier that would them. TIA

 

[G Mcpherson]

Any 4th Gen OEM running board should fit for your 2500. Do a Search for OEM

 

[johnmyster]

Facebook marketplace for all the diesel bros that ditch them for AMP steps. If you aren't looking for megacab w2w steps, they're out there in spades.

 

[Jeff Pangle]

Just purchased a 2025 2500 crew cab, Night edition Laramie with the 6.7. Need running boards.
Checking with the local Ram parts dealer and he can't source wheel to wheel black OEM running boards for this truck yet - odd.....
He said post on here and see if anyone knew of a OEM supplier that would them. TIA

Any links to the Mopar distributors for part numbers or order information is appreciated.

 

[Arth]

Just purchased a 2025 2500 crew cab, Night edition Laramie with the 6.7. Need running boards.
Checking with the local Ram parts dealer and he can't source wheel to wheel black OEM running boards for this truck yet - odd.....
He said post on here and see if anyone knew of a OEM supplier that would them. TIA

Back in 21 I wanted the same. You have to ordered them separately and the hardware kit too because if you didn't order it from the factory Mopar doesn't sell these boards as a kit. At least not back then they didnt.

Since the cab and all should be the same it could work. It'll be on you to be sure.

I purchased this hardware kit: 68193128AB
Then the boards I purchased were these: 6MP94KXJAA and 6MP95KXJAA.

Here are a few photos of my 21 so you can see the end result.

 

[Dave5316]

I got these boards on my 2024 truck from factory. Don’t waste your money. The painted plastic sections that run up the sides are all scraped with folk getting in truck. I’m going to buy rear box spray and spray them myself at least they’ll look better and not damage as easy.
I’d buy a different brand that are all metal or a better coating on them.