OEM "RAM" running boards

[AndyS]

Hi, does anyone by chance have a part number for the black oem running boards that have "RAM" embossed on them?
Thank you!

 

[Gondul]

Do you mean the deployable running boards?

 

[AndyS]

No sir, these seem like regular mounted boards..Saw them on a 2019 2500 at a local dealer. The RAM is on the side in front of each door. The boards were all black.

 

[MrMopar]

No sir, these seem like regular mounted boards..Saw them on a 2019 2500 at a local dealer. The RAM is on the side in front of each door. The boards were all black.

I ordered my 19 PW with them...
See this, maybe ask a Fleet Parts Guy at your dealer.

Amazon.com: Mopar 82213273AC Dodge Ram Crew Cab Black Tubular Side Steps: Automotive

Buy Mopar 82213273AC Dodge Ram Crew Cab Black Tubular Side Steps: Step Rails - Amazon.com ✓ FREE DELIVERY possible on eligible purchases

www.amazon.com

 

[Shine006]

Saw the same ones while getting first oil change. Had parts guy look them up. So new not sold as pair yet. Each side diff part number. If can’t read let me know and I will type in.

 

[MrMopar]

Saw the same ones while getting first oil change. Had parts guy look them up. So new not sold as pair yet. Each side diff part number. If can’t read let me know and I will type in.

Ouch...half that when ordered with my Build...Black Tubular Bar. $445

 

[Shine006]

Yep it’s why I didn’t pull the trigger. Supposedly this price is with discount. Was told they are 630 a piece but I haven’t contacted other dealers yet to verify.

 

[AndyS]

Ended up ordering the Luverne SST Boards. They should be here this week. Thanks for the replies!

 

[MEZZ2006]

I ended up with the OEM black wheel to wheel steps off eBay for ~half price. They were take offs with a month of use before I got them. They are wide, solid and sharp. The only minor issue i have seen is the rear, end caps are not held on by much (1 rivet and 1 small screw) so you have to make sure not to step on them when using the "3rd" step to reach into the box.

 

[MrMopar]

I ended up with the OEM black wheel to wheel steps off eBay for ~half price. They were take offs with a month of use before I got them. They are wide, solid and sharp. The only minor issue i have seen is the rear, end caps are not held on by much (1 rivet and 1 small screw) so you have to make sure not to step on them when using the "3rd" step to reach into the box.

Pics...

 

[Shine006]

I ended up with the OEM black wheel to wheel steps off eBay for ~half price. They were take offs with a month of use before I got them. They are wide, solid and sharp. The only minor issue i have seen is the rear, end caps are not held on by much (1 rivet and 1 small screw) so you have to make sure not to step on them when using the "3rd" step to reach into the box.

How do you like the OEM running boards?

 

[redriderbob]

2019 Ram 2500 Running Boards And Side Steps | Mopar Estores

Get OEM 2019 Ram 2500 Running Boards And Side Steps At An Unbeatable Price With Delivery Straight To Your Home From Our National Online Mopar Parts Store!

store.mopar.com

 

[MEZZ2006]

How do you like the OEM running boards?

I like them a lot. I think they look really good on the truck and the step itself is wide and very solid. I was going to get something else (not sure what) because of price, but when I found these take-offs, I jumped on them.

Pics...

Here are some pics, its been pretty crappy weather here and with 2 young kids, I finally got a couple pics this morning. The last one is the end cap I mentioned. There is one rivet on top (under the step pad) and one small screw on the bottom.

 

[Dialed-In]

I just ordered these in cab length for our truck. I ordered thru our dealer and had to buy individually plus the hardware kit. Almost $1200.00 but they look way nicer than the standard oval tube steps and AMP research hasn't come up with a solution for the factory air leveling tank under the passenger side of the truck.

 

[TexMarQue]

I like them a lot. I think they look really good on the truck and the step itself is wide and very solid. I was going to get something else (not sure what) because of price, but when I found these take-offs, I jumped on them.


Here are some pics, its been pretty crappy weather here and with 2 young kids, I finally got a couple pics this morning. The last one is the end cap I mentioned. There is one rivet on top (under the step pad) and one small screw on the bottom.

Those look great! I was at the dealership today and they told me these don’t exist in wheel to wheel length. Any chance you have part numbers?

 

[TexMarQue]

And now that I’m looking at your photos closer...what window deflectors do you have?

 

[MEZZ2006]

I'll crawl under the truck to look today for the part numbers. The window deflectors are EGR brand got them off ebay as open box, but they were brand new sealed box.

 

[TexMarQue]

I'll crawl under the truck to look today for the part numbers. The window deflectors are EGR brand got them off ebay as open box, but they were brand new sealed box.

I ordered the EGRs yesterday, so I’m glad to hear those are what you’ve got.

 

[TexMarQue]

I finally got the dealership to get these running bars ordered for me. Dang these are expensive. Mezz2006, I blame you for giving me the idea. I would have been content with something aftermarket had I not seen yours.

 

[MEZZ2006]

I finally got the dealership to get these running bars ordered for me. Dang these are expensive. Mezz2006, I blame you for giving me the idea. I would have been content with something aftermarket had I not seen yours.

Glad I could help, Isn't that what forums are for? Helping other people spend their money?