Got in my ram today and pushed the button and it sounded k\like the engine would try to turn over and then just stop. Finally hooked up a set of jumper cables and it fire right up. Voltage never dropped much. could it be a battery? Truck is three years old.
Ram Heavy Duty Forum
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
No crank
- Thread starter htrotte
- Start date
H3LZSN1P3R
You're doing it wrong
Yea you most likely have one bad battery
Sounded like a bad battery to me but I've never dealt with a push-button start before. I went and got a battery load tester and checked both batteries. One just barley passed and the other wouldn't even move the needle. Put two new batteries and everything is good. Voltage on dash shows 13.9.
Thanks for the replies guys!
Thanks for the replies guys!
I can see where you might not want to deal with the dealer, but if it's under warranty, so are the batteries.