MEGABEAST build

[~~Mutt~~]

Gonna take a few days adding to this and drive it some. Have minor rub on front plastic wheel wells.. Easy Easy fix.. Springs and shocks are settling in. Wanna put a couple hundred on them and then check every nut an bolt. Did add the rear business end with a 6 position 2.5" Hard Black Anodized Rhino Hitch with 10" Drop 14K SKU # RHI25BA14K10DHB. Opted for the set of 3 stainless balls from 2 5/16" 2" and 1 7/8. I do have the 30k Mopar 5th wheel in the bed but will be selling that and getting a Demco Autoslide sometime in the fall

 

[~~Mutt~~]

A great May day for mothers it is.. And my wife is still napping at the time I got up so. . On with some installs.. Today I am wrenching the Banks Black Op's rear diff cover.. Start with opening the box to inspect. All looks great. Well made and finally a rear cover that will work the way it should. Those little press on washers are a pain as in the 3rd pic but worked it out with a small wrench Studs hold the break line brackets so that was a different socket.. Last shot showing the beefy 4.11 ring gear.

 

[~~Mutt~~]

And here is the end result .. Yup.. Back on with the stock cover.. SO Lessons learned for this Mothers Day because it has been a Mother F'er so far.. Back on the Banks page ... you enter year make model an so on.. Then you find your part.. Then you click add to cart then pay then receive ......then cuss some.. Tell yourself.. Hey dumbass.. read the fine print.. It sez in red.. WON"T FIT AIR ASSIST.. Ok.. So anyway.. Read the fine print.. charge right angle impact wrench battery's ..Get more rags. Find different use for the rear lube an stop trying to use a gallon size baggie to fill into a funnel..it just doesn't work good layin on your back. Oh..an did I say get more rags? . Well yeah.. Double up on them and take brake clean with you cause your all out of starting fluid.. It could be an early 0Beer30 type of day..