Lift Kit

[areuriding]

Anyone running this exact setup? Scroll all the way through to see all the options I chose, basically everything except the sway bar option. I wanted to keep the factory disconnect. Not decided on rear springs but thinking the R2 since I'll have a cap on.

PINTOP SYSTEM​

Pintop System​

From: $5,725.00

Front Lift​	Rear Lift​
2″​	0.5″ – 2″​

Front Travel​	Rear Travel​
9.3″​	11″​

Shocks​	Tire Fitment​
2.5″ King Remote Reservoir​	37″ x 12.5″​

---

​

​ https://hdrams.com/forum/\"https:\/...-content\/uploads\/2018\/05\/CS-DFDG-14.jpg\" https://hdrams.com/forum/\"https:\/...ads\/2018\/10\/CS-DBJP-14-Product-Image.jpg\" SKU: CS-DBJP-14 Total: $8,985.00

 

[PMC]

I have the Pintop with the 2.0 rears but kept my Articulink radius arms, didn’t do the ball joints as my truck only had 9k on it and also kept my sway bar. I did do upper and lower steering stabilizers and diff bash guard. Did the 2.0 springs because I’m adding a Super Pacific camper end of the month (ordered in May). Ride is amazing and I expect it to be as good or better with the constant load in the bed. the shop that did mine talked with CJC at length about the intended usage and we decided to skip the fancy radius arms but added a second steering stabilizer as I’m running 37 MTs and it all just works. Expensive but real good.

 

[areuriding]

I have the Pintop with the 2.0 rears but kept my Articulink radius arms, didn’t do the ball joints as my truck only had 9k on it and also kept my sway bar. I did do upper and lower steering stabilizers and diff bash guard. Did the 2.0 springs because I’m adding a Super Pacific camper end of the month (ordered in May). Ride is amazing and I expect it to be as good or better with the constant load in the bed. the shop that did mine talked with CJC at length about the intended usage and we decided to skip the fancy radius arms but added a second steering stabilizer as I’m running 37 MTs and it all just works. Expensive but real good.

Thanks, That's what I needed to know. I went overkill but I'm like that. I still haven't decided on 35 or 37's yet. Thia is what I ended up with

Order summary​

CARLI SUSPENSION 2019+ 2500 Power Wagon Pin-Top System × 1 Standard Blue Anodizing with Blue Hoses (-$286.25) $5,725.00 $5,438.75​ Carli Suspension 2014+ Dodge Ram Low Mount Steering Stabilizer × 1 (-$16.00) $320.00 $304.00​ Carli Suspension 2019+ Ram 2500/3500 Stainless High Mount Steering Stabilizer × 1 (-$22.50) $450.00 $427.50​ Carli Suspension 2014+ Dodge Ram Fabricated Radius Arms × 1 Fabricated Radius Arms for 3.25" Lift Systems (-$79.75) $1,595.00 $1,515.25​ R1 Rear Coils × 1 Free​ Subtotal $7,685.50​ Shipping $0.00​ Estimated taxes $0.00​ Total $7,685.50 USD​ You saved $404.50​

 

[jsalbre]

You’re going to lose a lot of articulation with those radius arms.

 

[areuriding]

For what I'm doing I'll be fine. I had a long question and answer session with CJC and this is what we came up with collectively.