LED Projector Harness

[OC455]

Which wire in the headlight harness is the power to the headlight/low beam.

I am going to be using a Morimoto Bigbanger wiring harness and need to know which one it is and for the life of me I can't do a G-search worth a damn to look it up.

 

[OC455]

Or better yet, the parking/runnings lights would work....

 

[OC455]

I think I found it:

Pin Information​

Cav	Circuit	Gauge	Color	Function
1	L43	0.75	WH/DB	LEFT LOW BEAM DRIVER
2	Z907	0.75	BK	GROUND
3	L33	0.75	WH/GN	LEFT HIGH BEAM DRIVER
4	Z907	0.75	BK	GROUND
5	L61	0.75	WH/GN	LEFT FRONT TURN LAMP DRIVER
6	L551	0.35	BG/BN	LEFT FRONT LIGHTING FAULT SENSE
7	L77	0.75	WH/BN	LEFT FRONT PARK LAMP DRIVER
8	L145	0.75	WH/OG	LEFT SIDE MARKER CONTROL
9	Z907	0.75	BK	GROUND
10	D503	0.35	WH/OG	LIN LIGHTING
11	N0	0	NA	NO CONNECT
12	N0	0	NA	NO CONNECT
13	F927	0.35	PK/YE	RUN RELAY OUTPUT
14	Z907	0.75	BK	GROUND
15	D404	0.35	WH/BN	LIN BUS
16	L117	0.75	BG/DB	LEFT FRONT PARK LAMP DRIVER

​

 

[OC455]

I think I found a better solution to what I want to accomplish. Looking at the fuse box, there is a fuse F79 for the ID/Clearance lights I think I will use a fuse tap to to get the signal from.

 

[jsalbre]

I think I found a better solution to what I want to accomplish. Looking at the fuse box, there is a fuse F79 for the ID/Clearance lights I think I will use a fuse tap to to get the signal from.

I’d avoid using a fuse tap. Running the wire out of the box will stop the seal from keeping dust and water out. I suppose you could drill a hole and seal it, but I think you’re better off tapping the headlight harness.

 

[OC455]

More worried about compromising the integrity of the harness seeing how everything is all computer controlled. It looks like there is a double seal on the positive side connection and I can keep it from getting water/dust intrusion.