What's new
By:
Ram Heavy Duty Forum

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

In floor storgage

SFC said:
I crawled under my truck shortly after I bought it hoping to add the storage containers, the mega's don't have the cutouts.
Click to expand...

Dang !!! Such a cool feature to have.


Sent from my iPhone using Tapatalk
 
Any update on this? The parts numbers for the lid box and trim are pretty hard to come by. I think I am going to have to track down a junk yard. Looks like just a few screws to remove it. They want about $150 per side on eBay for all the parts involved. That is too steep for me for a bunch of plastic.
 
The bin for each side consists of 3 parts, and the part numbers are the same for both sides. They are the same from 2013-2020, so it’ll be way cheaper to grab them from a wrecked truck.
Bin body-68154661AC
Bin insert- 1MG92XXXAA
Lid- 5LF14XDVAB
These are the hex head bolts that bolt the bin to the floor, 4 total- M8x1.25, 25mm long.
These are the pan head screws with washers that bolt the lid to the floor, 8 total- M6x1.00, 42mm long.
 
they're the same on both sides i'm assuming, so you need 2x of everything..?
 
Jimmy07 said:
The bin for each side consists of 3 parts, and the part numbers are the same for both sides. They are the same from 2013-2020, so it’ll be way cheaper to grab them from a wrecked truck.
Bin body-68154661AC
Bin insert- 1MG92XXXAA
Lid- 5LF14XDVAB
These are the hex head bolts that bolt the bin to the floor, 4 total- M8x1.25, 25mm long.
These are the pan head screws with washers that bolt the lid to the floor, 8 total- M6x1.00, 42mm long.
Click to expand...
Badass, thank you
 
I bought a used set of complete Bins off ebay for $90. I added them to my tradesman, it was pretty easy, you just have to be comfortable cutting the carpet. Otherwise those block off plates are bolted and silicone down, so i unbolted them, scored the silicone with a razor, and popped out the plates.
 
got a full set delivered today. may give it a go this wknd.
 
elephantrider said:
got a full set delivered today. may give it a go this wknd.
Click to expand...

The hardest part is cutting the carpet / insulation because you're just cutting blind, and I wasn't 100% sure if the edge of the bins was supposed to cover JUST carpet, or if it was supposed to squish down the carpet AND insulation.

To help give me starting point for cutting, i popped the black plastic plugs up into the cab which made some little humps in the carpet to give me a better idea where to start with the razor.

floor panel.jpg
 
ah okay nice. I'll take it out to the shop, my buddy has a '19 limited that we'll use for reference. hopefully that will make it easier.
 
You must log in or register to reply here.
Back
Top