What's new
Ram Heavy Duty Forum

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Help with removing trim piece

stepbill

Member
Messages
79
Reaction score
31
Points
18
I am attempting to replace my stock headlights with the LED OEM headlights and am having an issue in removing a trim piece to get to the bottom of the front grill bolts. I saw a youtube video that says that you have to remove an interior bolt but this trim piece is different than what is in the video. Help!
 

Attachments

  • DSC_0098.JPG
    DSC_0098.JPG
    469.4 KB · Views: 21
  • DSC_0097.JPG
    DSC_0097.JPG
    468.8 KB · Views: 20
Now I am having an issue with getting the lower long front trim piece off. I removed some nuts and 4 screws that looked like it was holding it in place but near the two ends (left and right), the trim piece is not moving. Any ideas?
 
As it was brought to my attention by a very knowledgeable fellow, I was able to pry them off. Take your time but don't be a wuss about it. It just pops off. It is going to sound like it is breaking but it didn't, at least mine didn't. There are 4 black plastic tabs and the tabs actually slide off of the trim piece so don't be surprised if one or two fall off, they just slide back on.
 

Attachments

  • DSC_0101.JPG
    DSC_0101.JPG
    371.7 KB · Views: 20
  • DSC_0102.JPG
    DSC_0102.JPG
    358.4 KB · Views: 19
Back
Top