H3LZSN1P3R
You're doing it wrong
I paid 80k for my tradesman lvl2 thanks to the good ol canadian dollar, thats about 63k freedom dollars lol
Ram Heavy Duty Forum
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Gear indicator option in gauge cluster?
- Thread starter Randy M
- Start date
Translation:
Paid 80,000 Maple leaves, which equates to approximately 63,000 Bald Eagles.
I see you have a Cummins so maybe it is a difference with the cluster for the Hemi. Mine has a single character in the center of the top row for the gear indicator and has options to customizer the upper left and upper right displays. Regardless, I'm not seeing Current Gear in the menu at this point.
Yep, getting ready to say that I found it and Hate to say, they were right 
Go into settings but do not select left, right, center. Keep scrolling down past default and you will see it. Click on it and it will then allow you to say yes or no and it will display next to the D in the EVIC.
Go into settings but do not select left, right, center. Keep scrolling down past default and you will see it. Click on it and it will then allow you to say yes or no and it will display next to the D in the EVIC.
Rockcrawlindude
a rock crawlin’ dude
But it’s so much more fun counting shifts.
It’s like watching an action movie counting rounds fired and wondering why isn’t that sig 229 empty yet?
It’s like watching an action movie counting rounds fired and wondering why isn’t that sig 229 empty yet?
So you're that guy too?
My wife hates when I do the continuity game watching a movie.
LOL
Hahaha I do the same, watching a movie and I comment to my wife, "wow that revolver must have a 12 oh wait 13 round cylinder!". And she responds with "just shut up and watch the movie".
Eatonpcat
Well-Known Member
Yep, been counting shots since I watched Dirty Harry...Do you feel lucky Punk??
It’s like counting hubcaps in Bullit.
Rockcrawlindude
a rock crawlin’ dude
Yep, getting ready to say that I found it and Hate to say, they were right
Must be a Cummins option. My 6.4 doesn’t have this setting. I just checked it. 2019 tradesman lvl 2 with 8.4.
H3LZSN1P3R
You're doing it wrong
None do without the alfa obd programing from my understanding
BULLSANDBUCKSHUNTER
Active Member
- Messages
- 152
- Reaction score
- 124
- Points
- 43
And apparently not in Laramie lv2s(and assuming higher), enabled in alfa still not avaliable
When you go to the settings page, don't select where to put it, just scroll down. Should say something like left, center, right, default. Keep scrolling down and you should see gear select.
Make sure that when you enter settings, just keep pushing the down arrow and you will scroll through a things (center, left, right....). Keep scrolling and you should run into gear indicator prior to going through all settings.
Yes, it will work.
elephantrider
Hydraulic Lifter Crew
- Messages
- 2,435
- Reaction score
- 3,307
- Points
- 113
I just did this change in alfa. hasn't shown up in the set up menu yet.
May take a few key cycles?
Looking back through the thread, other 19 owners have done it.
You're looking in the EVIC right? It's not in the radio.