Hey all. So this may seem stupid ... I’ve installed the fog lights into the bumper, left the wire in the back seat and taken the truck to the dealership to finish the install. They told me that it can’t be done because I’m missing the wire for the plug in to the body harness so it can’t be done ... does that make sense to you all? I have a 19 big horn 2500 6.4 gasser. Thanks for the help guys !
Ram Heavy Duty Forum
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Fog light install question
- Thread starter Wpg_Ram
- Start date
b307a1
Well-Known Member
Are they OEM lights and do you have auxiliary switches?
I’m doing oem install ... oem fogsc swapped out the headlight switch
b307a1
Well-Known Member
I am not sure if you have seen it but there is a thread dealing with fog lamp installation in "modifications and accessories" you might find some answers and try posting your questions there.
Last edited:
elephantrider
Hydraulic Lifter Crew
- Messages
- 2,435
- Reaction score
- 3,307
- Points
- 113
sounds like you don't have the pigtail off the bcm harness to run factory fogs. you'll have to run a separate switch or utilize an aux switch, if you have those.
check out the thread mentioned above. tons of info.
check out the thread mentioned above. tons of info.
Thank you !
thank you !
b307a1
Well-Known Member
Hey, no charge!
In the dealer’s eyes, it can’t be done because of exactly what they said - the circuits are not present in the left dash harness. Since there’s no such mopar kit for fog lamps for the 2019+ HD Rams, they would think they have to replace the entire left dash harness to gain those circuits. The REALITY is- it is very simple to just add those circuits to the BCM, and have factory functioning fogs. This thread has those details- https://hdrams.com/forum/index.php?threads/fog-light-for-2019-tradesman.431/
Thank you for the help !