Emblem Placement

[Tcrist]

looking for some measurements and or pictures of the ‘RAM’ door emblems.
I already have replacement emblems with the lettering spaced out

 

[Tcrist]

looking for some measurements and or pictures of the ‘RAM’ door emblems.
I already have replacement emblems with the lettering spaced out

Anybody willing to measure their door emblems? Thank you

 

[f100jetmech]

Anybody willing to measure their door emblems? Thank you

4 5/8" from the front edge of the door to the lower forward side of the "R". 1 1/2" up from the body line.

 

[zeke383440]

You may already be doing this but if you use some painters tape to “border” the front and bottom locations first it’ll allow you to step back and look prior to applying emblems.

 

[f100jetmech]

Also, letters are spaced 1/4" apart at the bottom.

 

[Tcrist]

4 5/8" from the front edge of the door to the lower forward side of the "R". 1 1/2" up from the body line.

Very much appreciated! Have a good one