Dually wheels

[Mmitera]

Just bought a new 2024 Ram Dually tradesman. Wanting to get some new wheels and tires for it. I’d like to do 20” wheels and 35x12.5 tires but have them stick out past the fenders the least amount possible with that combination. I don’t mind sticking out a little bit but not a ton. Will also do a leveling kit on it. Does anyone know what wheels I would need to achieve this? Offset? Thanks

 

[Jayc2111]

I have a 2024 Ram 3500 DRW HO with factory rear auto level and 4.10's. I put a 0.50" Thuren Level Kit with (4) Fox 2.0 Reservoir Shocks on and was able to clear 37x12.5x17 Toyo Open Country RT on the stock Acola's. I was the same with not wanting the rears to stick out too much past the rear fender and as little as possible. I did have to use a 2" rear spacer to keep a good space between the rears so it sticks out about an inch past the fender now. In my opinion it's not too much and still looks clean. Not having it stick out too far was a big thing for me. What a difference in ride quality...much smoother now. Run the fronts at 45 psi and rears at 45 psi. I still retained full towing capacity and have no issues pulling 20k lbs with about 4,700 lbs pin weight.

FYI...Thuren has several sizes for their level kits so make sure you measure from the center of rim to the high point of the inside fender to get the desired look. I personally didn't want nose high and this puts it dead level for my rig. Most of the newer 3500 with the auto rear level come pretty close to level already.