Crusty's 75th Annv PW #1590 build/mods adventure

[Crusty old shellback]

Got some more parts in today
Regulator with a 600 PSI gauge and hose.



300 PSI gauge to replace the 600 one .


No loss air chuck for filling.



Just need a couple of adapters and a on/off valve for the chuck.

 

[Crusty old shellback]

So did all of the machine work on the rest of the shocks. Installed the schrader valves with a dab of blue locktight. They are sitting under pressure now to see if they leak.
Ordered oil and rebuild kits from Summit racing. Should be here tomorrow.

 

[Crusty old shellback]

Got a package today .





So these look like Fox kits. They do have a lot more parts in them than the poly performance kit I had before. And they cost less.

 

[Crusty old shellback]

Got the last parts for my charging rig. Tested it out and it works.

Also put the 300 PSI gauge on a equalized the pressure at my altitude.

 

[Crusty old shellback]

So looking at the rebuild kit, id say it's a complete kit. Besides all the O rings, it comes with the following.
From top to bottom
1. Lock nut for the shock mount shaft.
2. Bushings for the top shock mount.
3. External Bumper for the shock shaft.
4. Bottom seal internal bumper.
5. Bottom seal bushing.
6. Bottom seal seal.



None of this was in the poly performance kit I had purchased