What's new
Ram Heavy Duty Forum

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Console Swap Help!!!

Messages
44
Reaction score
32
Points
18
Hey everyone,

Recently swapped a center console from a 2019 longhorn into a 2021 power wagon that had the jump seat originally. Both had the same options.

I bought an extension for the main wiring harness and ran that from under the drivers seat to the center console and plugged it in. I also bought a usb 2.0 extension and plugged that from the dash into the usb 2.0 plug on the center console.

I have the below cord (I believe it’s the usb power, it’s the third plug next to the two usb 2.0’s in the center console) coming from the dash that’s too short to reach the input for it on the center console.

Two questions - does anyone know where I can order an extension for the below?

Also, I don’t have anything working at the moment even with the main wiring harness and usb 2.0 plugged in. Besides the above extension, does anyone know if there’s anything else I need to order?

Thx in advance!

0B064005-5490-43CB-8004-A3D5FFBC90FA.jpeg
 
Got it sorted, @Jimmy07 helped walk me through some of the wiring and the extended cable I got from infotainment to extend the main wiring harness from under the drivers seat to the dash wasn’t correct. Took it out, managed to stretch the original cable to the dash and everything works perfectly!
 
Can you explain the wiring to me? I just got the new console but don't understand the harness that came with it.
 
Back
Top