You need a custom harness
![]()
2016 - 2019 RAM CHMSL Camera Harness | KaodTech
Used to replace the missing factory wiring on your RAM truck when adding the factory CHMSL Camera. This harness will only work on RAM trucks from 2016 and up without the surround view system. If you have a 2013-2016 truck with a 8.4 radio and firmware version 17.11, this harness will also...www.kaodtech.com
You also need the analog camera CHMSL, not the digital one. Analog has a multiple pin camera connector, the digital one has a coax connector.
Where can i find the camera and the cord? The link that is on here says they will notify me when they have them in. I was not sure if there were other manufactures of that cable. Also, is it plug and play or do i need to do anything else?You need a custom harness
![]()
2016 - 2019 RAM CHMSL Camera Harness | KaodTech
Used to replace the missing factory wiring on your RAM truck when adding the factory CHMSL Camera. This harness will only work on RAM trucks from 2016 and up without the surround view system. If you have a 2013-2016 truck with a 8.4 radio and firmware version 17.11, this harness will also...www.kaodtech.com
You also need the analog camera CHMSL, not the digital one. Analog has a multiple pin camera connector, the digital one has a coax connector.
Thats the only maker of the custom harness that I am aware of. You will also need to get AlfaOBD software, I use the version for Android found in Google Store. To make the needed program changes so it shows up on your radio, you also need the Security Module Bypass came also sold by Kaodtech. Finding the camera is tougher, i kept searching on Ebay until one came available.Where can i find the camera and the cord? The link that is on here says they will notify me when they have them in. I was not sure if there were other manufactures of that cable. Also, is it plug and play or do i need to do anything else?