Cab mount torque setting

[heyguy]

Anyone know the torque setting for the 2 nuts on either side of the cab mounts? TIA

 

[99ls1tj]

https://static.nhtsa.gov/odi/tsbs/2020/MC-10184772-9999.pdf

I would say 45 ft lbs?

 

[heyguy]

https://static.nhtsa.gov/odi/tsbs/2020/MC-10184772-9999.pdf

I would say 45 ft lbs?

Perfect thx! Would be nice if Torklift told you what torque to tighten the factory hardware back down to when installing their products....

 

[Jwhitney82]

Anyone know the torque setting for the 2 nuts on either side of the cab mounts? TIA
View attachment 14269

It is 80 for the front 3 mounts and 90 for the rear.

 

[Rockcrawlindude]

https://static.nhtsa.gov/odi/tsbs/2020/MC-10184772-9999.pdf

I would say 45 ft lbs?

45lb ft looks like the two little locator bolts on the body mount. I see 80 lb front and 85 lb rear

 

[99ls1tj]

It is 80 for the front 3 mounts and 90 for the rea

45lb ft looks like the two little locator bolts on the body mount. I see 80 lb front and 85 lb rear

He was asking about the smaller ones.

 

[Rockcrawlindude]

He was asking about the smaller ones.

You’re right!

 

[Jwhitney82]

He was asking about the smaller ones.

My bad. I didn’t look at the picture closely.

 

[heyguy]

What Torklift product are you installing?

D2142 front tie downs.

 

[heyguy]

OK, because I was reading the instructions for the D2140 and it called for those nuts to be torqued to 25 lb-ft. Reference step four on page seven although I must admit that number seems quite low to me.

Yeah too low, went with 45 as suggested.