What's new
Ram Heavy Duty Forum

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Block heater plug socket

Dave5316

New Member
Messages
23
Reaction score
15
Points
3
Has anyone fitted a power socket to the front of their 3500 for easy plug in for block heater.
Got one of Amazon and not really wanting to put on grill in case I drive away with cord in and rip grill off. Where have you guys fitted one.

Thanks in advance
 
If you pull away, it will likely just unplug itself or pull the cord out. Minimal problem.
Can't admit I've done that myself, but can reference a BIL who likely has.
 
I’ve driven away with a truck still plugged in, and can confirm that it just unplugs itself.
 
I had it , unplug from the socket on wall then catch the tires lol. Thinking the plastic valance were it joins the metal bumper next to front license place might be best place if there’s nothing behind it . Nothing worse than seeing the winter snake on the road on way home from work then realizing it’s yours .
 
That’s the same one I got. It’s going on stock bumper or valance so just checking there’s not a better place than the one I thought off before I drill .

Thanks for the replies so far guys
 
Thanks for the photos. I was hoping to put it on the flat section just above where yours is located. But need to get under truck to see what’s in the way etc
 
Thanks again for the replies, the lower section does look easy to install it on. Just have to get it done on days off. Temps starting to drop already up here.
 
Back
Top