What's new
By:
Ram Heavy Duty Forum

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Banks pedalmonster question

C

CFE

Well-Known Member
Messages
398
Reaction score
287
Points
63
Local shop is doing the amp powersteps today (Amongst a few other things) and they use the obd port for power/control. I'm waiting for Banks tech support to call back but figured it wouldn't hurt to ask here. Can I just unplug the pedalmonster from the obd port without restoring the throttle map back to stock?

Figure I will have to buy a obd Y splitter to run both the powersteps and pedalmonster until i decide to go with a legal tune.
 
CFE said:
Local shop is doing the amp powersteps today (Amongst a few other things) and they use the obd port for power/control. I'm waiting for Banks tech support to call back but figured it wouldn't hurt to ask here. Can I just unplug the pedalmonster from the obd port without restoring the throttle map back to stock?

Figure I will have to buy a obd Y splitter to run both the powersteps and pedalmonster until i decide to go with a legal tune.
Click to expand...
You are not changing anything on the truck with the throttle map the OBD2 port is mostly just for power so no you dint have to change it
 
Yes I've driven mine with it unplugged to the dealer. Worked just fine except it makes you realize how much the pedal monster makes a difference. You'll have that Y splitter in no more than a week I bet. Banks sells a splitter just for this issue.

Sent from my ONEPLUS A6013 using Tapatalk
 
  • Like
Reactions: CFE
I use my pedal monster with A Tazer Hd. I use a y cable and everything works fine for me. Maybe a option for you if you want to use both.


Sent from my iPhone using Tapatalk
 
  • Like
Reactions: CFE
cquilichini said:
I do my AMP Powersteps and Pedal Monster with a Y OBD-Splitter from Amazon.
Click to expand...
yea, i went with a 3x split obd cable - to give me the opportunity to plug in alfaobd if needed. each line has it own off/on switch.
 
CFE said:
yea, i went with a 3x split obd cable - to give me the opportunity to plug in alfaobd if needed. each line has it own off/on switch.
Click to expand...
can you share the link to the splitter you used? Thanks
 
  • Like
Reactions: CFE
  • Like
Reactions: CFE
so with that 3 way you can pedal commander, amp steps, and obdlink for logging? and they all work simultaneously?
 
You must log in or register to reply here.
Back
Top