What's new
By:
Ram Heavy Duty Forum

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

AlfaOBD

downsc123 said:
I saw a post in this thread where some changed the side mirror lights to running lights. Anyone know what AlfaOBD setting that is?
Click to expand...
What year truck? I know the 4th gens uses a harness.
 
It was post 731. Do the blinkers on the mirrors stay energized (act as running lights similar to the clearance lamps)?
 
jetrinka said:
Has anyone had any luck disabling the "be safe" disclaimer that pops up on the display when the truck is started?
Click to expand...
Not unless you can crack the UConnect
 
Etoimos said:
There is a "be safe" disclaimer when the truck starts? I've never noticed that before.
Click to expand...
At least on mine. It pops up saying basically be safe when using the NAV blah blah blah and you need to select OK before it goes away
 
iflyskyhigh said:
I don’t have that. Don’t ever remember seeing it.
Click to expand...
UC5 only displays this message after a soft reboot, not on each startup.
UC4 does display the message on every startup.

No way to stop it from happening, but you don’t have to press accept. It will go away on its own. When I had UC4, it would go away as soon as I put the truck in reverse…which is immediately after I start it.
 
Jimmy07 said:
UC5 only displays this message after a soft reboot, not on each startup.
UC4 does display the message on every startup.

No way to stop it from happening, but you don’t have to press accept. It will go away on its own. When I had UC4, it would go away as soon as I put the truck in reverse…which is immediately after I start it.
Click to expand...
Find a way Jimmy! I believe in you!!! :p:p:p
 
You must log in or register to reply here.
Back
Top