Adding amazon bed lights

[ChillxPoint]

So I'm installing these Amazon bed lights because my 2024 tradesman wasn't equipped with bed lights and I'm going to power them with one of my AUX switches, but I wonder what fuse to use? I assume 20 amp would be too much? See link.

Amazon.com

 

[G Mcpherson]

With an Aux Switch does it matter? When I installed under Hood Lights I did not install a fuse that I remember. Just Tied into the Wire Switch I used on my Aux.

 

[ChillxPoint]

With an Aux Switch does it matter? When I installed under Hood Lights I did not install a fuse that I remember. Just Tied into the Wire Switch I used on my Aux.

The aux switches have fuses that range from 20 to 40 I believe. Was wondering what amp to use?

 

[H3LZSN1P3R]

So I'm installing these Amazon bed lights because my 2024 tradesman wasn't equipped with bed lights and I'm going to power them with one of my AUX switches, but I wonder what fuse to use? I assume 20 amp would be too much? See link.

Amazon.com

10 amp would be plenty but im not sure you can get them that low. The 20 will be fine.