What's new
By:
Ram Heavy Duty Forum

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

6'4" Tonneau covers w/o rambox

Skinner

Skinner

Member
Messages
27
Reaction score
28
Points
13
Location
Alberta, Canada
I did a search for anyone who might have a tonneau cover for the 6'4" bed without ramboxes but was not successful.

So I am wondering, has anyone found a soft roll tonneau cover for the 6'4" bed yet? My dealer cannot find anything currently as the box is actually shorter for 2019 by 1.5 inches compared to the 2018, or so they say.

Thanks in advance.
 
It's an Access Vanish. Works good, fits good, doesn't cost an arm and a leg.
 
I have the bakflip revolver x4 and it fits perfect. Its the same bed as all have said. you will have no issues with something made for the '18
 
Got a cheap one for now. Gator Covers

Can't speak to their quality over time but install was easy enough and fit it very nice. We were looking for a low profile cover and this fit the bill.
 
Thanks for the replies everyone.

My cover came in yesterday at the dealer. Have to wait until Monday to grab it as I'm out in the Rockies right now but I'll let you know how it goes when I get it. I got the Mopar soft roll for $407 CDN. Saved $150 CDN on it.

I had the same type on my 2018 1500 and liked it so hopefully the new one is just as nice.
 
Last edited:
as stated above, beds are same size. I have a lund genesis on mine and it was the same model as my 2018 2500. the 2019 1500s however, do have a different bed and the tonneau cover will not fit.
 
Stavo said:
Got a cheap one for now. Gator Covers

Can't speak to their quality over time but install was easy enough and fit it very nice. We were looking for a low profile cover and this fit the bill.
Click to expand...
I’d like a review of your Gator Cover now that you’ve had it for a couple weeks. Which one did you get, what are your thoughts, and if it gets stolen tonight would you get the same again? Thanks!
 
TexMarQue said:
I’d like a review of your Gator Cover now that you’ve had it for a couple weeks. Which one did you get, what are your thoughts, and if it gets stolen tonight would you get the same again? Thanks!
Click to expand...
Got the Gator SRX rollup (the one linked in my original post). Still liking it. Keeping the bed dry in rain both sitting in the driveway and going down the road. As a whole, it's light, fit is nice and low and is easy for one person to open/close. When rolled up it is nice and small and doesn't impact your rear view. Seems to be holding up just fine but it's only been a couple thousand miles.

I may go to a hard rollup if I replace this but that's only b/c of the way we are currently using it. Went with the lower price soft roll up as we weren't sure exactly how/how much we'd use the bed for larger items.

As of now, I'd buy it again if I didn't go hard roll up. But then again, it hasn't been through a Chicago winter yet.
 
Stavo said:
Got the Gator SRX rollup (the one linked in my original post). Still liking it. Keeping the bed dry in rain both sitting in the driveway and going down the road. As a whole, it's light, fit is nice and low and is easy for one person to open/close. When rolled up it is nice and small and doesn't impact your rear view. Seems to be holding up just fine but it's only been a couple thousand miles.

I may go to a hard rollup if I replace this but that's only b/c of the way we are currently using it. Went with the lower price soft roll up as we weren't sure exactly how/how much we'd use the bed for larger items.

As of now, I'd buy it again if I didn't go hard roll up. But then again, it hasn't been through a Chicago winter yet.
Click to expand...
Thanks for the review!
 
I got the Tyger, which is supposed to be 6.5 vs. some of the 6.4 lengths. It really fit nicely and had good reviews. I had a TonnoPro for the past 10 years on my old F250 and it held up well. This one seems similar or better quality. It was $206 on Amazon - just ignore when they say it won't fit the 2019! It fits well.

IMG_3424.jpgIMG_3426.jpg
 
I have a 2019 Ram 2500 6'4" bed without Rambox. I found a Bak mx4 cover but it was on the new style 2019 Ram 1500 6'4" bed. So, are the beds the same between 1500 and 2500? Thinking it should fit/work. Thanks!
 
Thanks. I am thinking the 1500 6'4" box is the same dimensions as the 2500 6'4" box. I want to get the MX4 but just want to make sure the one I am buying that was on the 1500 will fit on my 2500.
 
Tell3131 said:
Thanks. I am thinking the 1500 6'4" box is the same dimensions as the 2500 6'4" box. I want to get the MX4 but just want to make sure the one I am buying that was on the 1500 will fit on my 2500.
Click to expand...
The 6'4" bed for the 2019 Ram 1500 and 2019 Ram 2500/3500 are not the same. The HD bed is wider even though the length is the same. I have a leftover tonneau cover from my 2019 1500 and it does not fit my 2019 3500.
 
You must log in or register to reply here.
Back
Top