2026 Bypass?

[tacticalcucumber]

Hello all! I traded my 23 2500 for a 2026 3500 SRW Longhorn. Swapping over all my stuff and I went to do my bypass cable and....the CANBUS blocks are gone from under the dash on the driver's side . I'm sure someone has to know where they are...so...any thoughts? There's also an orange pull loop under the panel like there is on 1500s.

Also, I think based on the RF hub and other security gateway updates, a security bypass and Tazer MAY be possible now. Going to try eventually but I want to get AlfaOBD up and running before I do.

Any help is appreciated!

 

[Jimmy07]

The 2025+ use a different Canbus architecture and security gateway, so there’s no canbus junction blocks, and it’s not possible to physically bypass the security gateway.
Using alfaobd on the 2025+ is also very different than previous. Here’s a write-up I did on how to use alfaobd on the 2025+ 1500’s, but it’s the same process for the HD Rams.

How To Use AlfaOBD On 2025+

Alright, here’s all the info on how to use alfaobd on these 2025+ 1500’s. For those of you who are familiar with using it on previous Rams, Jeeps, Dodges, etc, this is going to be very different, and at first seem a little overwhelming. The modules (ECUs) in these 2025 trucks use a proxi...

5thgenrams.com

 

[CdnHO]

Well, that answered a question I was going to ask. Just read Jimmy07s piece on the 2026 and I guess I will just forget about making any changes. LOL.