True. The AT seems hard to find in the 20” version. 17”/18” are out there and are a fair amount less.
Sent from me
Ram Heavy Duty Forum
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
2019 2500 4x4 tow rig / support rig
- Thread starter Rockcrawlindude
- Start date
True. The AT seems hard to find in the 20” version. 17”/18” are out there and are a fair amount less.
Sent from me
Rockcrawlindude
a rock crawlin’ dude
$381 each, it helps that the size I bought is the OE tire for the tremor
Rockcrawlindude
a rock crawlin’ dude
I wash my truck bout once a year, it’s just the px8 black is an oddball black it always seems to look clean in pics. Thanks bud.
Rockcrawlindude
a rock crawlin’ dude
It was real wet but still a good time. Lots of trails. Definitely could have fun in the power wagon
Not with it knocking hahaha but everything happens for a reason and I may have an AEV PXL to take there
Rockcrawlindude
a rock crawlin’ dude
Updates to the Ram
Sold the decked system a few months back. Glad to have my bed back. No pics but I’m back to using totes for my recovery gear etc
Also Added some Baja Designs S2 pro wide cornering at the ditch light position.
I chose the s2 pro for their extremely low profile, I didn’t want big ol lights. I painted the S2 chrome brackets textured black because it closely matches powder coat and will cut down on glare off the chrome
I added them to my off-road light switch that runs the Baja Designs Squadron sports on the bumper (The Squadron SAE are in the fog position and normally on with headlights)
I went with moromoto brackets after shopping around because they were the most well thought out, in my opinion. They have rubber bumpers that squish up against the edge of the hood, they have wire retaining clips, and they’re slotted for ease of install.
As I mentioned, they’re all on one switch but the wiring comes through the firewall with an @NHOverland grommet kit
Sold the decked system a few months back. Glad to have my bed back. No pics but I’m back to using totes for my recovery gear etc
Also Added some Baja Designs S2 pro wide cornering at the ditch light position.
I chose the s2 pro for their extremely low profile, I didn’t want big ol lights. I painted the S2 chrome brackets textured black because it closely matches powder coat and will cut down on glare off the chrome
I added them to my off-road light switch that runs the Baja Designs Squadron sports on the bumper (The Squadron SAE are in the fog position and normally on with headlights)
I went with moromoto brackets after shopping around because they were the most well thought out, in my opinion. They have rubber bumpers that squish up against the edge of the hood, they have wire retaining clips, and they’re slotted for ease of install.
As I mentioned, they’re all on one switch but the wiring comes through the firewall with an @NHOverland grommet kit
Last edited: