120v outlet in bed not working

[Texasram1]

I used it once about a year ago with no issues. Tried to use it last week and there was no power (truck on or off).

Is there a fuse I should check and if so, where?
Anything else I should look into?

Thanks

 

[2019_Ram]

It's the switch for it in the cab by the emergency brake on?

 

[Texasram1]

Yes

 

[CdnHO]

Yes

Do the other outlets work?

 

[Texasram1]

Just checked; nope. Found the Fuse popped

 

[CdnHO]

Just checked; nope. Found the Fuse popped

Remember you are limited to 400 watts and that is divided among all the outlets since there is only one inverter. Happy to hear you found the problem.

 

[ktolbert524]

I am having a similar issue where the internal outlets are operational, and the cargo (bed) is not. The switch by the dash, when pressed, stays lit up, and yet plugging in a simple lamp to the bed outlet does not work.

I checked the fuses and the wiring up to the dash switch, and I even unplugged and re-plugged the harness that runs to the bed outlet with no avail. Any other steps I should try to troubleshoot this? I have a 2024 2500