Search results

So I contacted the dealer and apparently you cannot buy the gasket. It comes with the door handle so I guess if you have a door handle with a leaking gasket, you gotta buy an entire door handle to get a new gasket. So dumb

Yep I believe it is a 3.0. Makes sense now. I picked up a 2021 mirror and the camera in the CMHSL didn’t work but I got a CMHSL from a 2021 and it worked so looks like eBay will be seeing a 3.0 mirror and CMHSL pretty soon!!

Answer is no.

I plan on going in to ask about their buy 3 tires get the 4th for a buck and I’ll ask them then. Thanks!! Jeff

Looks like I’ll most likely have to do that.

Very nice!! I put a Carli 2.5 lift in the front of my truck with 1.5 inch leaf spring spacer on my 3500. I also added a 1.5 airbag spacer to keep the rear geometry. I picked up some rims and hoping to fit 37’s in mine as well!

Is 68057284AA (door handle pad) the rubber gasket between the outer door skin and handle? Thanks Jeff

Did you ever figure this out?? I have a 2020 3500 that I want to add 360 view and digital rear view and I have the chsml from a 2021 and a headliner from the truck that had the 360 view so it has the fakra to plug into the cargo camera in the chsml but that seems to go into the headliner harness...

so anyway…….Went ahead and ordered the wiring harness for the 1500 running board from Bam wholesale along with the wiring harness that goes to the rearview mirror for the adaptive cruise control, and front collision warning. I think I have all the connectors and wire pins selected on mouser.com...

Thanks. That’s what I was thinking. I’ll chalk it up to the rearview mirror is defective or the Linbus thing won’t work on the 3.0 mirrors. I’ll get my hands on a mirror from a 2021 this weekend and see if it works. Thanks!!

I read on the thread for installing the 360 camera one was to go to the third brake light, and the other one feeds the signal to the stereo.

As the tile suggest, I’m curious if I need power to the CMHSL for the digital rearview camera to work. I picked up a used CMHSL I wanted to just plug the camera in to see if it worked and it didn’t so I wasn’t sure if I needed to feed power to it to make it work or if I have another issue...

Installed a 2 1/2 Carli lift in the front, Carli track bar and shocks. Also installed a 1 1/2 space in the rear for the leaf spring and air bags.

picked up the running boards of market place and being shipped so I’m going to order the wiring kit for the 1500 I think and adapt it just because it’s easier. Although I know I’ll need to make the harness for the aux kit so maybe I’ll make a spreadsheet of those parts and the parts for this...

Thanks!! I was thinking that as well.

Couldn’t think of a good title. Essentially i’m adding some updates to my truck which means running wiring from inside the cab through the firewall into the engine bay and back and since that seems like a pain, I wanna make sure I do it all one time so below I ramble about what all I’m planning...

Maybe the trailer camera?

I have a 2020 3500 and I’m looking to add the 360 surround view. Here’s the camera module I picked up. I assume front back, left, right are for the tailgate handle, grille and mirror cameras. One of the other two should be for the cargo brake light. Is it the orange or pink? And what is the last...

thanks a lot. I appreciate the insight!!

Thanks!! I was looking at getting those when I was in SoCal but now that I’m in Oregon I’m not sure because I’ve read a lot of poor reviews for its rain traction. Have you noticed any traction issues in the rain?