Search results

It wasn’t overly easy nor was it impossible. I’ve found that different power seats from the 2019+ are wired differently depending on the presence or absence of a center console or center jump seat. The biggest issue I’ve run into is the occupant presence and seat belt sensors for the airbag...

No, the passenger side seat belt/seat presence sensor throws an air bag error code. The only work around I have so far is to keep the old seat belt base plugged into the old harness and set under the passenger seat. In other words, I have the new passenger seat belt latch that was mounted on...

Any Ram 4th gen seat 2010 and up will bolt in as will 2019-up HD seats. The new body style 1500 seats will not bolt in so don’t even try it. There are lots of variations on seats depending on whether or not they have side air bags, heated and heated/cooled functions. I swapped a 2020 HD...

Funny. They must have figured out how to make a magnet stick to aluminum then if my ‘17 has an aluminum hood.

Was told mine was in spec after 2 dealers and a active case. Blows cool at best but far from cold. 95 here today and it was warm in the cab all day while driving for almost 5 hours.

That’s the low end Katzkin set that’s heavy on the vinyl. If you do it, be sure it’s really Katzkin and not some really junky kit from Roadwire or others. Had a place named Auto Trim Restyling in Manchester MO sell me a Katzkin Rawlings Edition interior and the really installed a cheap Roadwire...

Don’t waste your money. My ‘19 Tradesman is just as big of a piece of problematic junk that is described by Ram as “normal”.

I have installed 6 of the Katzkin sets. Takes around 8 hours to do it by yourself for the first time, give or take. Definitely pull all of the seats out of the truck as you do them...don’t try to shortcut and install with them in the truck. You’ll be disassembling a lot but it’s not terrible...

Good suggestion but I’m not touching mine whatsoever. When it breaks from metal fatigue, I want those factory painted hinge nuts to have no socket or wrench marks on it and the mount bone stock. They’re gonna own this failure 100% and not pawn it off on anything. It will fail. Aluminum can’t...

Here’s a video of my ‘19 compared to a ‘17

My hand was just there to open it. Closing it was using my palm. Doesn't matter how I position my hand(s). One handed.....two handed, braced left or braced right, still the same thing. The right side is more likely to not latch than the left. Several times, the left side latches and the...

I don't know if it helps or not, but I just looked at my '19 Tradesman with the factory LED fog lights (Safety Group). The driver's side LED fog has a white/yellow wire and a black wire. The passenger side LED has a white/orange wire and a black wire. Each light only has 2 wires connected...

Hello, group! I have been a member on the other forum for years and just joined here. Having a lot of issues on my new 2019 and am woefully disappointed. Longtime Dodge/Ram Cummins owner here. I apologize that my first post here is dumping on the HD Rams. I'm hoping to get all of this...