Recent content by wilsonck

Duratrac's have been pretty good for me in 35+ sizes

After putting on the air horn, I got a code, but can't remember if it was that one or another. I found that I hadn't fully tightened 2 of the 4 screws holding on the egr valve, so I did have a boost leak. After tightening that and erasing code, a couple days later I got it again and it turned...

So, I added a monster Ram a month ago and things were fine till last weekend and I got the P0299. Had a fleetguard air filter, but replaced it with a mopar, just in case. Didn't fix the problem. Then I saw the post above about the 2 connectors possibly being mis-connected. I went over them...

Did they fix it? codes gone? I just got a p0299. Have had the monster ram intake on for about a month with no problem till this weekend. Found this one post saying it could be related to having 2 of the sensors hooked up wrong, but when I checked, I am 99% sure mine are fine...

Hi, I have a 2020 2500. I have had some odd noises when I turn right into a certain parking lot and sometimes it even feels like I can feel something by my left foot, so I figured that maybe it was with my A pillar body mount. When I went to loosen all body mounts along one side of the truck...

Not sure what you mean. I installed one on my old 2013 3500 and for xmas, got one for my 2020 2500. They are available.

I put EMF in my 2013 3500 and they were good for a number of years. Make sure you buy their little tool for removing the cap. Also when installing pay attention to where you the set screw is aiming. They have a number of videos on youtube for some tips.

How are those trucks starting in the cold with the Banks Ram Air and the banks heater instead of the stock intake heater? Especially in this deep freeze?

I added my passive handles today. Love having them again!

Why not just put the stock rear springs back in? I have the Thuren 2.75 springs up front and kept the stocks in back with a 2" block

yes, I replaced it myself. It took longer than expected and I think as other threads say, you need some good drill bits as you need to drill a hole or two and make one bigger if I remember correctly.

I agree. The ride was improved with the Thuren rear trackbar. Loaded and unloaded

have you looked through the AlphaOBD thread? I thought there was an option for turning that on. I have LED lights and tried it and it didn't seem to make a difference or maybe I missed a step, but if you don't have LED's, maybe it will work. I tried looking through my notes for the setting...

just keep in mind if you tow a RV or heavier trailer that your rear end will sag. I put the add a pack on my '13, then added Sumo springs to try helping, but ended up taking them out and putting the overload spring back in.

yeah, I checked with the Dealer yesterday and they said they have been waiting about 6 months for any touch up paint. Said something about Dodge was changing suppliers or something to that affect