Recent content by sony224422

i am curious if the range can be modified, especially in the 25/26

what did the back connector look like vs the one in your truck? did you have 8 wires in your truck side connector?

what years fit? 19-26? im guessing switches and wiring is different too

So far, I have found that I'll need a new wiring harness, which is expected, and new heat pads/module. looks like the motors are all the same, airbags are the same but ill probably swap them to be safe and the cooling motors are one rev newer, which makes me think they are updated. all in to...

i think im going to give this a whirl and see where i end up. my thoughts at the moment are that the base seat components will work, but i will need to keep my stock modules. not sure if that means proxi alignment or not but i will see if ordering a wiring harness for the heated/cooled seats...

have you been able to get it installed yet? if so what year do you have?

does anyone know if the modules in the tradesman seats will swap over to the power seats? Or do i need new modules and wiring for that?

how about going the other way? going from 21 seats into a 26 tradesmen? I would need this harness 68647940AB and this module 68550020AB? and find the correct module for the passenger side?

Interesting that the sticker says 2025 on it for the years

I would think with Alfa seemingly closer, you’d be able to change the tank size as it looks like it’s a hex code change. I will admit, while I’m decent with programming, I am not sure if it would require it to be an option or if you can manually tell it there’s 46 gallons and to do the...

Will these not work with the 2025-26 trucks? I’m guessing it’s not fitment but because you can’t tell the computer you put a bigger tank on?

I have a friend who is parting out a power wagon, and has some nice seats/console. I know right now the Alfa problems, but im more curious if the older seats would even work module wise. Are they able to be proxi aligned with the truck or do they need different modules? I was thinking of...

Thanks all- i ended up with a retrax with the t slots. as for the rake, I got yakima bars and cargo box. I know the beach trips will be nicer being able to put some of the soft stuff or sandy stuff up in the cargo box. I plan on not running the bars unless I need them, leaving the short little...

What are you guys running for bed covers with 5th wheel or gooseneck? I would like to put a rack on it too if possible either through a track or through the cover. the only one i have seen able to do this is the diamondback switchback. i just don't know if I like that the panel against the cab...

I have a 26 tradesman on order, and am looking at doing a center console swap. I see that the alfaobd is not a solution yet for anything else really, but will I get functionality out of all the ports with a center console swap? For the steering wheel, I’m guessing this is out of the picture...