Recent content by relbus

New fear unlocked. Its been years since I had to kill the truck at a drive through to place my order though.. the newer trucks are so much quieter

Removing F82 and replacing did not work for me. I only removed it for a minute or so. After that I did the batt cable trick and my buttons are working again. I believe they already replaced a module...i think it was that module. I need to reference the paperwork to be sure though.

I will try this before I leave the office today and see if it works for me. my buttons are not working at the moment and I haven't had a chance to pull the batt cables.

2023 2500. 53xxx miles. I bought it 5/31/23. The damn steering wheel controls going out has been one of the most annoying issues I have ever had on a vehicle. Ram can't fix it, they seem to be willing to keep trying but at this point they are replacing items they have already replaced during...

If it makes you feel better, I am on my 6th Ram Cummins. I have had great luck with the trucks overall. Until this point any pain and suffering was self inflicted since I voided warranties and chased horsepower. For those of you still under warranty, and less than a year old - I would kick...

I am still dealing with this issue. I have been getting by popping the batt cables off for 5 min here and there. Prob done it about 1/2 dozen times now. Dealer is useless. Ram is useless. Pretty much getting ghosted on return calls from dealer.

I had the GDP horn, plenum, and that heater on my 2008 back in the day. Worked great! I honestly cant remember if I had to replace that injector line to run it. What intake horn are you using? Does your truck have the EGR system still? I also considered this heater, but I am emissions...

Also - I am not interested in the BD solution. The OEM heater still gets all sooted up, and if I am digging in that far to install the BD might as well do it my preferred way.

I intend to delete the grid heater on my 23 immediately. I was one of the unlucky ones who had an engine failure due to this issue on my 2013, so I am paranoid to say the least. I thought the engine was covered to 100k, but recently learned the grid heater falls under 3yr/36k and if it fails and...

My 2013, 2020, and now 2023 make the same noise. My 2008 6.7 I never noticed the noise.

Case#90794036 - This is my case # with US customer care. Ram is unable to fix my truck. They have tried numerous times, and they are now circling back replacing the same parts that were previously replaced 1 and 2 times already.

I've done the battery disconnect trick 3x now to get my controls back working. Each time, the "fix" has lasted a different length of time. Just stopped working again today. This pisses me off so much. @RamCares fix this BS!!

Daily for the most part. Truck is always clean.. I have a membership for unlimited washes at the car wash chain near us. I literally just got home from washing it.

Can I ask, why? Doesn't the plate bracket come with the hardware needed to secure it? Like those little plastic bushings the self tapper screws thread into? I tossed my plate bracket, and ordered the painted to match plugs. Would recommend...

I took the Ram in late last week and they swapped a module and the buttons and lights are fully functional again. I was in a hurry and the paperwork was not done - so I am not exactly sure what was swapped. Waiting on paperwork to be emailed still. Fingers crossed they got it this time!