Recent content by red

I finished the weight loss program. The EGR was electronically removed in September when the DPF and SCR were removed. Physically removed the EGR today. The shop wanted an extra $1K to do this so I decided to tackle it myself. Probably close to 50lbs of parts in the pile.

It should be 4" round. It's angled so your tape measure is likely being tricked.

Ouch. 28mm is the correct size, also use a 6 point socket rather than a 12 point.

Same here, very irritating.

Wood cutting expedition a few weeks ago.

I'm in Alberta but don't run M/Ts. I run Bridgestone Blizzak LT tires in winter and A/Ts in the spring/summer/early fall.

You shouldn't get any failure messages when you unplug the camera/light. Just stuff the wiring inside the cavity and install the plate.

Why do you want to put a flat CHMSL there? Kind of moot when you install a canopy that's going to block it entirely. When I installed my canopy, I just ordered a flat delete plate for the CHMSL. Part number is 68412030AB

Another shoutout for the Starlink Mini here. Just added one to our TT a few months ago. Having internet in the middle of nowhere with WiFi calling is fantastic!

Jokes aside, the zero cost option would be as many have suggested, lower the tire pressures as much as possible. I have a 3500 and had a 1500 prior to it. My wife complained about the ride a little ar first but it doesn't seem to bother her anymore. I typically run about 60psi on all 4 corners.

Somehow I got a vision of my mother-in-law laying down in the bed for ballast.

Does anyone have the part number for the longer locking dip stick?

I put my 2020 3500 on a rapid weight loss diet!

I can't believe the hack job they did on the cab lights. Looks like bare metal exposed where they cut the openings in the roof skin.

Same issue. It drives me nuts!