Recent content by Rabbo

I have these on my truck, lifted the front 2.5" with new coils and the back .875" for a level stance. The adjustable rods did not affect the ride, I almost want to say the ride is improved by raising the rear 875 in. Look at the bags I posted above, expensive but I believe it is the best set up...

I've been looking for options and found these bags from cjc off-road. Every truck I have owned I've had airbags, they all diminish the ride quality. My 2023 with a Carli 2 1/2 " suspension system rides like dream and want to keep it that way. These bags can easily be removed when not needed, the...

Could somebody layout the steps in alpha obd app on wich settings to tick for the cargo bed lights. I unsuccessfully looked for sep by sep tutorial .I have changed the tpms setting successfully and that's extent of my experience with the app. I believe to start on body computer but not sure from...

I had a closer look on the Kelderman Manufacturing site, you are correct the bags are in the same location as stock. There would be no interference with the stock sensor and there are aftermarket adjustable rods available for ride height adjustment. My only question is, the computer obviously...

Can you provide a resource, part#. Looks like they are in the stock location. I was looking at the Kelderman Manufacturing bags that install more outward in the bump stop location that would help sway. In talking with them the stock air management is not compatible.

Thank You for the reply.... what are you towing or hauling? Does the axillary bags cause your truck to ride rougher when empty? My previous truck, the rear end would bottom sooner with bags than the bump stop. So when camping season was over I would remove the bags.

What psi do you run when loaded not to upset the auto level? Judging from the image the stand-offs for the sensors look to be about 1"? I'm considering doing this, the fifth wheel I am looking to purchase would put me 500 lbs over the payload capacity of my megacab, the secondary airbags should...

Matty, few questions.... I'm assuming you ordered the airbag kit for the standard coil spring unit? What is the psi you run on the after market bags or what is the most psi before the factory air system freaks out? I have a heavy camper that I'm trying to figure out if I can make work. I failed...

I believe this is it..... https://mopar.worldoemparts.com/oem-parts/mopar-intelligent-power-power-distribution-center-68547200aa?origin=pla&gad_source=1&gclid=Cj0KCQjw-_mvBhDwARIsAA-Q0Q4XXryXZWnKJ3fadt8d4imk04c6QBjBbI9dna3L02bckrxRnvL1L_8aAjtTEALw_wcB

Got it, thank you. I purchased the harness kit from Florotory, it made the wiring part way easier...

Hello, I am finally getting around to sorting out the aux switches as well as the led bed lights. I want to get the Security Gateway Module Bypass, what product are you guys using? From what I have researched there are several ways to go about it. There is the harness from kaodtech...

I will take possession of a new 2023 megacab 2500 in two weeks, one of the options I was after was the factory aux switches, unfortunately, this truck didn't check that box. I was going to order the Mopar auxiliary kit https://www.moparamerica.com/oem-parts/mopar-auxiliary-switch-kit-82216450ab...