Recent content by Jackmup

Considering the garbage they sell the truck with it should be changeable when you change tires. I want a truck not a 1/4 mile car with bologna skinz. I changed my tires as soon as I got the truck. Just because the big three all sell em with garbage doesn't mean we can't revisit 1990 when they...

Go with the name you like best after all you're the one looking at it. I did bighorn but I think the Lonestar would be nice.

I have heard ( have not done mine yet ) you need to use the airbags that came with your original seat and it's harness.

I want to add just the driver power, i have a 2020 tradesman do you happen to remeber the colors for pos/neg in the seat harness or is it pretty much self evident (ie 2 thicker wires with no connections to the cab harness) i figured i would run a circuit with an ign on relay to power it.

I went with 20" Toyo open country AT3 they are similar to the KO2 tread pattern and at 50psi it rides nice, Carli recommends 45 but you have to reset the tpms warning threshold first. ( Can't do it after it's triggered have to reinflate then set threshold then deflate)

i like the lonestar badge

That stack looks like it has heated steering wheel and seats. It's for the diesel but what trim level and options do you have? It's worth taking a ride to a dealer and locate a truck with the exact one you want, write its vin number down and go straight into the parts dept. They can pull it up...

They are the Mopar oem mudflaps. They are real nice about 1/2" thick rubber and molded to the body.

thanks Dave88LX Carli has links to Toyo inflation charts. 45psi in a toyo is the same load capacity as 80 psi in the firestones it came with. To say Toyo E rated is a tougher 10 ply than the firestone E rated 8 ply isn't even scratching the surface. So I lowered psi to 45 then went into apps and...

Stop at a stealer that has a lonestar get the VIN and have the parts guy look up the one you want.

Same exact height as originals if it's off it's by 1/8". I combed through tires for this size to make sure it would be same height.

Yes all changed they are the correct Ram oem nuts for the wheels.

Contacted Carli and they had CJC get back to me. They told me to lower psi in tires to 45 when unladen and to add the Carli steering stabilizer to dampen road feedback because oem does not dampen. Psi no problem and the stabilizer is 8 weeks so have to wait for those results.

New York...When taking the highway means you are going OFFROAD!

Dutchess and work in Putnam.