Recent content by against_The_Wind

Just got my new travel trailer. I hook up and I select vehicle and then dashboard, then towing and trailers which shows me all the guages, gain, oil psi, etc. First time I did this Only the brake controller gain was showing, and none of the other guages were active or working. Then the brake...

Thanks! That makes me feel a lot better, last thing I want is to have to take it to the dealer. It's a little annoying at times, but as long as its normal, I will deal with it.

2023 6.4 liter, with 1,100 miles so far and if I turn everything of, radio, climate, I can hear this odd noise that I'm having a hard time describing. Sounds like it's coming from behind the steering wheel and it's a even tone low pitched whooshing noise. I just realized tonight that the...

They did pay to replace it and it's all done. I really appreciate the offer though! I just happen to be close to cincy too!

Interesting, mine is fairly even from left to right or right to left. Mine is off when looking at the gap between the whole cab and bed, when viewing the gap by standing in the bed looking down.

I measured right at each outer section of the bed by laying a ruler to the cab, making sure it was oriented the same way on each side while standing in the bed looking down I can also visually tell now that I'm aware of this, that the rubber strip that runs horizontally between the entire...

I've already lost enough sleep over this truck and I've only had it a week. This never dawned on me till i saw it mentioned somewhere online and I went out and measured and yep its off a quarter of an inch. Is it worth me taking it to the dealer, I'm starting to think not, over the years I'm...

Gotcha, heard there could be some room for adjustment, just not sure if it's worth the trouble for 1/4 inch

When measuring the gap between the bed and cab, on one side there is a 1/4 in difference. I've read this being an issue on some trucks, but should I worry if it's just 1/4 of an inch? Not sure if it's even worth taking to the dealer if it's only gonna be a cosmetic issue only. Truck is brand...

Gotcha, good to know

Thanks, I hope not, may try to loosen tomorrow to see if they go back to straight. I guess even if they stay a little bent, it won't hurt anything.

Just got my lomax trifold cover delivered today and when installing the clamps, I noticed where the clamp squeezes the pinch weld and rail of the cover, the pinch weld is bending in order to get a tight grip. Is this a concern? I torqued all clamps to 15 ft lbs, and lomax actually calls for all...

Just got my 2023 bighorn with the hemi 6.4 and there is no badging. Was the the badging deleted on the 2023s?

Gotcha, thanks guys, I'm at 200 miles as of now!

What confused me the most is this video. This guy claims he got his break in procedure directly from mopar, but it's far more detailed than what's currently in my manual...