Show Me Your Lights

[el_barto]

Show me your lights!

Currently just have added Rock lights (8x Lux Max White). I think the stock LED headlights are quite good, as are the LED foglights although I’m thinking i will be upgrading the foglights to Diode Dynamics or Baja Designs with the OEM round halogen bezels…White or Amber is the question...
I do have an interior visor light bar(undercover cop style) that can do flood mode I just havent gotten to finish wiring it yet. Obviously that would be for offroad / scene lighting only.

Out back I’ve thought about LED pods but the stock LED reverse lamps + the mirror mounted spotter LEDs honestly seem like enough.

 

[Darkone]

Im running mainly Diode Dynamics on my truck and am extremely pleased with their performance. I swapped out the fog lights for a set of SS3 sports originally in white now in amber. I added a stage series 18” bar in the lower bumper for a little bit more distance down road. And outback I have a set of SS3 sport in a flood pattern mounted on the frame for auxiliary reverse lights.
When I changed out my ss3 fogs from white to amber I wasn’t sure how well I’d like them ,but personally I like amber better. I can actually tell when they are on and in the fog they really help out.
I also have a set of kc cyclones mounted in the hood on a ground switch when I open the it.
I don’t have any photos of them all on but here is a few showing the lights.

 

[Fishnerd]

I have baja squadrons in the front and diode ss3 in the back. Thinking about adding some LP9 or LP6 up front, i havent seen any mounts I like so im designing a custom mount.

 

[elephantrider]

 

[Gear box]

I will play.
Board lights- marker and signals

 

[cucamelsmd15@]

I have baja squadrons in the front and diode ss3 in the back. Thinking about adding some LP9 or LP6 up front, i havent seen any mounts I like so im designing a custom mount.

View attachment 42527View attachment 42528View attachment 42529

I have been eyeing these for a while. Are they that big of an upgrade over stock?

 

[d0ppler302]

Im running mainly Diode Dynamics on my truck and am extremely pleased with their performance. I swapped out the fog lights for a set of SS3 sports originally in white now in amber. I added a stage series 18” bar in the lower bumper for a little bit more distance down road. And outback I have a set of SS3 sport in a flood pattern mounted on the frame for auxiliary reverse lights.
When I changed out my ss3 fogs from white to amber I wasn’t sure how well I’d like them ,but personally I like amber better. I can actually tell when they are on and in the fog they really help out.
I also have a set of kc cyclones mounted in the hood on a ground switch when I open the it.
I don’t have any photos of them all on but here is a few showing the lights. View attachment 42524View attachment 42525View attachment 42526

What bracket did you use for the light bar in the lower grill?

 

[Darkone]

@d0ppler302 I honestly don’t remember where I got the bracket from. I wouldn’t recommend anyone use it. The bracket does the job but really wasn’t that well made. Eventually I’ll do something different with my front lighting and get rid of it.

 

[JABAR357]

I will play.
Board lights- marker and signals
View attachment 42552

Curious on how you attached the board lights and how they are holding up.

 

[Gear box]

Curious on how you attached the board lights and how they are holding up.

They are holding up fine , a little tight to wire up behind the step brackets but well protected there. They just use two sided tape to stay In place

 

[pyrorobert]

I just replaced the fog lights with Baja Designs S2 lights. One clear and one yellow.

Sent from my SM-F946U1 using Tapatalk

 

[P8trit]

I just replaced the fog lights with Baja Designs S2 lights. One clear and one yellow.

Sent from my SM-F946U1 using Tapatalk

What bracket did you use? Looks great!

 

[pyrorobert]

I purchased the brackets from Baja Designs but I had to modify them to fit the two lights

Sent from my SM-F946U1 using Tapatalk

 

[dieselscout80]

I purchased the brackets from Baja Designs but I had to modify them to fit the two lights

Sent from my SM-F946U1 using Tapatalk

pyrorobert, cool setup!

Is there room in that mount to point the outside light more to the side to illuminate the side of the road/ditch?

 

[ppine]

I really like the factory lights on the roof and the stock headlights. From the front the Ram looks like a semi tractor.

 

[pyrorobert]

pyrorobert, cool setup!

Is there room in that mount to point the outside light more to the side to illuminate the side of the road/ditch?

Yes I would think so, I am still adjusting them to what best suits the output

Sent from my SM-F946U1 using Tapatalk