2023 3500 SRW with factory rear air leveling - lift or leveling kit to fit 37" tires suggestion??

[tcedgar8]

Thanks!! I’ll measure and see. If 1” in rear, that will be perfect. thanks again. I load dirt bikes in the bed so not wanting to go any higher for sure!! Getting to old for that crap!

Here's some more pic of my tuck.

 

[Mxz0588]

Hey Guys,

I just ordered Thurens .5" front lift with shocks all around as I have factory air ride on my 24' Laramie. Whats the largest tire/wheel combo I can run? Im looking at 20x10 - 19 offset with ether 35x12.5 or 11.5 wide if I am going to rub. I use my truck to tow all the time so I want to avoid rubbing if I can, but .5" is not a lot of gain on the front lift. thanks in advance.

 

[AH64ID]

Hey Guys,

I just ordered Thurens .5" front lift with shocks all around as I have factory air ride on my 24' Laramie. Whats the largest tire/wheel combo I can run? Im looking at 20x10 - 19 offset with ether 35x12.5 or 11.5 wide if I am going to rub. I use my truck to tow all the time so I want to avoid rubbing if I can, but .5" is not a lot of gain on the front lift. thanks in advance.

2013-2022 RAM 3500 TIRE AND WHEEL FITMENT

Choose the right wheel and tire combo for fender clearance, especially with 0-3 inch lifts. Learn why our setup works best for durability and performance. #WheelandTireCombo #ThurenFabrication #TruckMods

www.thurenfabrication.com

20x10 with a -19 offset?

 

[Mxz0588]

2013-2022 RAM 3500 TIRE AND WHEEL FITMENT

Choose the right wheel and tire combo for fender clearance, especially with 0-3 inch lifts. Learn why our setup works best for durability and performance. #WheelandTireCombo #ThurenFabrication #TruckMods

www.thurenfabrication.com

20x10 with a -19 offset?

https://www.customwheeloffset.com/buy-wheel-offset/H109-2010816547B/hostile-alpha-20x10-19?vehicle_type=Truck&year=2024&make=Ram&model=2500&trim=Laramie&drive=4WD&modification=Minor+Plastic+Trimming&rubbing=No+rubbing+or+scrubbing&suspension=Leveling+Kit