Search results

Here is what I used for mine. Don't think it's all the same for yours. Cab Net ICS integrated center stack. Click it and enable it. Scroll down a couple and click on Cabin Net DCSD display screen module and enable it. If you cant get AC to work move to next step Now for hvac controls...

Sorry I have the have I meant

No I have the uaq nav unit. Here is what I enabled to get auto climate to work. Try this Cab Net ICS integrated center stack. Click it and enable it.

I ordered the one with NAV on ebay. It is the step up from the one you have. The 8.4 with nav is called a 4c or UAV code radio

ya sorry. I ended up replacing the radio module and the camera works fine on that. I bought a brand new one for 950 bucks. So I have 2000 in the upgrade. Still 600 cheaper then infotainment.

I also was able to get the passive entry to work also. Did it all through alfaodb.

I replaced the radio control module and it fixed the backup camera. I say the original one was bad

Yes correct

Is it the same control module for the 2500 and the 1500

Ya what is weird is I bought the radio off if Troutman from the 5th gen forums and he said it all worked in his 2500.

I can plug my original 5 inch in and it comes up every time.

So the farthest left one and the pink and the black connector are not used on my new radio. I tried plugging the camera into the pink connector with the universal fakra cable also and no difference. My camera on the old and the new plug into the maroon connector.

Yes pink and I think an aqua color and also like a 10 pin black connector

Is it UAV. If so my dealership said that is not a code they can add. I added what it needs through alfaodb but can't get the camera working after a couple of weeks. So I am going to take it to the dealer to see if they can get it going. I'd like for them to add the code for the new radio...

Tried the universal fakra cable today with no luck. I think I'll take it to the dealer to see if they can get it goin. Hopefully they don't void any warranty cause I switched from the 5 to the 8.4.

No I put it in the other day and no volume control with it either.

Thanks jimmy. Maybe I'll swap the door panels sometime.

Well I installed my steering wheel and the volume control on the right does not work. I then ordered a replacement right button and tried it and still nothing. What is weird is the center button on the switch switches between sources just fine but the up and down do nothing. The left button...

So these connectors were not on my original harness that I replaced when I installed the passive door entry. Are these for the door panel lights that my tradesman doesn't have. These connectors can plug into each other. They have the same color wires on each harness.

I am guessing that the new harness has a spot to hook up the door lights but not sure if these are it. They can connect to each other and have the same colors on both wires. One does have a yellow tape around the jacket. These were not on my original tradesman harness. They came on the new...