Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
You will need to get LED bezels and brackets and swap them for the halogen versions. If you have front park assist you need the bezels with the holes for those sensors.
68449321AA bezel for LEDs, one set comes with both sides. THIS is for the non-park assist version, I don't know the part...
From what I have read, the BSM is disabled in your truck when you connect a trailer, regardless of what kind. Starting in '20, they changed it to work with conventional trailers, but still disabled with 5th wheel. Seems like you can swap in tail light assemblies from a '20 and get it to work...
That is the blind spot monitor (BSM). Do you gave a 5th wheel? BSM is disabled (maybe automatically?) when a 5th wheel is hooked up because it interferes with the sensors in the taillights.
Decided not to mess with mirrors, added led marker lights to the mirror flag. Dimmed it a bit with a 1.2k resistor.
Hardest part was finding used taillights for a reasonable price. Everything else was a breeze, thanks to the help found here!
Same thing here. That tail light connector sticks out too far to allow you to slide the assembly onto the plastic pins. Had to first insert pins to assembly, then push the whole thing into place. Not clear how you get that apart next time ....
This is the parts list I bought when I put OEM LEDs in my Tradesman.
650806AA bolts to mount Lights to brackets - 4 each side
68368951AA bolts to mount brackets to truck - 4 each side
68404464AA j-nuts, used with bolts above - 4 each side
68449321AA bezel for LEDs (halogen bezels are...
I thought part of this mod rewires the horn so that the BCM is no longer in the loop. When the horn switch is pressed, the horn is sounded via the VSIM output from the horn switch triggering the relay, instead of the BCM triggering the relay. Did I get that part wrong?